|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
07-13-2011, 06:22 PM | #11 |
Getting Wild
Join Date: Mar 2011
Location: Glendale Arizona
Posts: 94
|
Re: Carb Adjustment?
Up until this little deal I have now, you could just tap the pedal and it would start instantly. Even when cold you could just pull the choke once, tap the pedal and she'd start right up. I want that back.............
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-16-2011, 03:32 PM | #12 |
Not Yet Wild
Join Date: Jun 2011
Location: CT
Posts: 21
|
Re: Carb Adjustment?
Well i sprayed the carb cleaner near the seals and it ran differently. I have most of it apart and will hopefully get the seals replaced next week when they come in. Will post if it works or not.
Rivertime howd you make out? |
07-21-2011, 08:42 PM | #13 |
Not Yet Wild
Join Date: Jun 2011
Location: CT
Posts: 21
|
Re: Carb Adjustment?
Well i installed the seals and off she went. It runs totally different from the day i purchased it. Sounds different and really gets up and goes. It took me a few hrs to complete the task. Having the air gun saved the day. Thanks for all the great info guys.
Rivertime..... how are you making out with your seals??? it has to be them. the clutch side was worn and the fan side had a chunk missing out of it. |
07-21-2011, 08:46 PM | #14 |
Not Yet Wild
Join Date: Jun 2011
Location: CT
Posts: 21
|
Re: Carb Adjustment?
Doomsman...any other adjustments you could recommend on the carb to get the most out of the motor. It really takes off now and seems to fall off alittle once it gets up to speed (is that normal?). It does have a new belt.
|
07-21-2011, 09:35 PM | #15 |
Getting Wild
Join Date: Mar 2011
Location: Glendale Arizona
Posts: 94
|
Re: Carb Adjustment?
Ordered my clutch puller and the threads were all banged up on it when it arrived. Threads inside the clutch didn't look too great either. I've ordered a tap and die set to clean up the threads. Can't do anything until those tools make it here and I can get the clutch off.
Thanks for asking. Dan |
07-22-2011, 08:42 PM | #16 |
Getting Wild
Join Date: Mar 2011
Location: Glendale Arizona
Posts: 94
|
Re: Carb Adjustment?
Finally got my stuff. Looks like the seal fixed mine too. Won't know for sure until I go to start it tomorrow morning, but it fired right away after putting it together.
Sitting over night was when it was at it's worst. I've got her loaded in the back of the truck to take it back over to the river. We'll see how it does this weekend. I've got it down now. I have the tool, and the tool to fix the tool Could probably do it in less than an hour. Tight squeeze eh? You can hear the tire rubber sqeaking past the wheel wells when you drive it up into the truck bed. |
07-22-2011, 08:48 PM | #17 |
Not Yet Wild
Join Date: Jun 2011
Location: CT
Posts: 21
|
Re: Carb Adjustment?
That's great!!!!!!!!!....I still cant believe the difference the seals made. Wish i knew they were bad when i bought it.
|
07-22-2011, 09:40 PM | #18 |
Getting Wild
Join Date: Mar 2011
Location: Glendale Arizona
Posts: 94
|
Re: Carb Adjustment?
Thanks
Mine weren't bad when I bought it. Guess they just went shortly after. I expected to see a missing piece or ratty looking edges when I got it apart. Other than it being kinda hard and crusty where the crank passes through, they looked fine. Guess that's why once I managed to get it started it ran o.k. for the mostpart. Feeling a lot better about the whole deal now. They're really pretty easy to work on. |
|
|
Similar Threads | ||||
Thread | Forum | |||
93 ez go carb adjustment | Gas EZGO | |||
2PG Carb adjustment | Gas EZGO | |||
EZ GO TXT Carb adjustment | Gas EZGO | |||
Carb Adjustment? | Gas Yamaha | |||
Carb Adjustment??? | Gas golf carts |