|
Gas Club Car Gas DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
08-22-2014, 05:23 PM | #1 |
Getting Wild
Join Date: Jun 2008
Location: western NY
Posts: 121
|
Is this what a new ball joint is suppose to look like?
Just received an order for replacement ball joints for my DS and this is how they came. Is the rubber boot suppose to be loose like that? I assumed it would be secured to the housing better. Perhaps a groove around the perimeter housing that the boot would seat in. The only reason I bought the new ball joints is because the boots on the current ball joints are quite "relaxed" and aren't tight around the housing.
I imagine the boot will be snugged up to the housing once installed. But the seal doesn't seem adequate. Well, I guess its just a golf cart. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-23-2014, 11:49 AM | #2 |
Getting Wild
Join Date: Jun 2008
Location: western NY
Posts: 121
|
Re: Is this what a new ball joint is suppose to look like?
Any one? Is this how they are suppose to be? That's not how they looked in the picture on the stores website. Thanks
|
08-23-2014, 12:57 PM | #3 |
Gone Wild
Join Date: Nov 2013
Location: Aylett, Va. on the Mattaponi.
Posts: 1,530
|
Re: Is this what a new ball joint is suppose to look like?
Once you bolt them down they should seal up pretty decent.
|
08-23-2014, 01:27 PM | #4 |
Guest
Posts: n/a
|
Re: Is this what a new ball joint is suppose to look like?
never seen one that flat ...
|
09-06-2014, 05:15 PM | #5 |
Getting Wild
Join Date: Jun 2008
Location: western NY
Posts: 121
|
Re: Is this what a new ball joint is suppose to look like?
I ended up installing them. When tightened in place the boot did snug up to the housing but not, in my estimation, tight enough to seal out moisture and dirt. They should really have a better seal. As I said before, it's only a golf cart so I guess not big deal.
Still, had i know I wouldn't have replaced the ones on the cart. Only the seal was bad on them. |
09-06-2014, 05:27 PM | #6 |
Guest
Posts: n/a
|
Re: Is this what a new ball joint is suppose to look like?
i got a boot at auto parts store
|
09-06-2014, 05:30 PM | #7 |
Getting Wild
Join Date: Jun 2008
Location: western NY
Posts: 121
|
Re: Is this what a new ball joint is suppose to look like?
I wish I would have known to do that. I just assume that golf carts would be completely different than cars. I could have saved a few $ and saved some time.
|
09-06-2014, 09:23 PM | #8 |
ΜΟΛΩΝ ΛΑΒΕ
Join Date: Nov 2012
Location: West Virginia
Posts: 4,094
|
Re: Is this what a new ball joint is suppose to look like?
I have tie rod ends just like those with the flat boots on my cart, and I hate them!! The stupid things won't take grease no matter what I do! The fitting isnt plugged at all, and the things are brand new, they just won't allow you to pump any grease in!
|
09-07-2014, 08:01 AM | #9 |
Getting Wild
Join Date: Jun 2008
Location: western NY
Posts: 121
|
Re: Is this what a new ball joint is suppose to look like?
Crash- How did you find the right boot at the auto parts store? Take in some dimensions or take in the part for them to match up? Thanks
|
09-07-2014, 08:51 AM | #10 |
Guest
Posts: n/a
|
Re: Is this what a new ball joint is suppose to look like?
i took old one in .. on the help! rack they had 1/2" , 9/16" , and 5/8".. i think i got the 1/2" shaft
HELP 1/2 in. shaft universal tie rod dust boot |
|
|
Similar Threads | ||||
Thread | Forum | |||
91' Par Car ball cups/ Ball joint ends??? | Columbia ParCar | |||
WTB Ball Joint SPACERS ? | Golf Carts and Parts | |||
Ball joint blues | Electric Club Car | |||
ball joint question? | Electric EZGO | |||
Tie Rod ball joint help | Lifted Golf Carts |