lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 04-02-2017, 11:22 AM   #1
RicksRam
Getting Wild
E-Z-GO
 
Join Date: Apr 2010
Location: Aiken South Carolina
Posts: 105
Default Voltage and Current on XCT Controller

Still having problems with new motor and controller. Xct 500 amp for DCS 36 to 48 volt upgrade hooked up the software with laptop. Software is showing no current and 2.1 volts when pedal depressed. Also has a warning down where it shows rpm and will not let me change it, It is showing 1000 rpms. This may be the problem but wont let me change it. Any help would be appreciated. Thanks
RicksRam is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 04-02-2017, 11:46 AM   #2
JohnnieB
Techno-Nerd
 
JohnnieB's Avatar
E-Z-GO
 
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
Default Re: Voltage and Current on XCT Controller

Quote:
Originally Posted by RicksRam View Post
Still having problems with new motor and controller. Xct 500 amp for DCS 36 to 48 volt upgrade hooked up the software with laptop. Software is showing no current and 2.1 volts when pedal depressed. Also has a warning down where it shows rpm and will not let me change it, It is showing 1000 rpms. This may be the problem but wont let me change it. Any help would be appreciated. Thanks
Do you have a XCT48500-DCS controller?
What does the warning say?

With a XCT48500-DCS, there are no provisions for a speed sensor and the "Enable Speed Limit" box should not be checked.

On the monitor tab, are any of the error flag set?
JohnnieB is offline   Reply With Quote
Old 04-02-2017, 12:33 PM   #3
scottyb
Happy Carting
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 72,744
Default Re: Voltage and Current on XCT Controller

Try deselecting monitor RPM on page 1
scottyb is offline   Reply With Quote
Old 04-02-2017, 02:16 PM   #4
RicksRam
Getting Wild
E-Z-GO
 
Join Date: Apr 2010
Location: Aiken South Carolina
Posts: 105
Default Re: Voltage and Current on XCT Controller

got it scotty thanks . Just reset the controller
RicksRam is offline   Reply With Quote
Old 04-02-2017, 02:16 PM   #5
RicksRam
Getting Wild
E-Z-GO
 
Join Date: Apr 2010
Location: Aiken South Carolina
Posts: 105
Default Re: Voltage and Current on XCT Controller

Thanks Johnnie had to reset controller. thank you
RicksRam is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
key switch voltage and current Electric EZGO
Electric motor voltage/current questions Electric EZGO
RXV High Current Controller Electric EZGO
2008 TXT with PDS draws current with controller in ".tow" Electric EZGO
voltage across the controller Electric EZGO


All times are GMT -5. The time now is 03:29 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2023, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.