![]() |
|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
![]() ![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Not Yet Wild
Join Date: May 2012
Posts: 1
|
![]() I am trying to test an EZGO Textron 20484 Total Charge (36 V)to see if it is working. It won't come on, hum, anything. I understand most of the charges have to sense a minimum amount of voltage before they will come on, my problem is, I have the charger and not the cart(my mom's cart, which is 150 miles away). I think the problem she was having is from the contact on the plug in on the DC side was slid out and not making contact(I think) and now I would like to verify that the charger works before sending it back. Is it possible to trick the unit into thinking it has the required voltage in order to verify function and output?
Any help or suggestions would be greatly appreciated! |
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
Operation of EZGO Textron Total Charge | Electric EZGO | |||
EZGO Textron "Total Charge 111" won't auto shut off when batteries are fully charged | Electric EZGO | |||
Textron Total Charge Charger | Electric EZGO | |||
Charging New Batteries w/ EZGO Total Charge | Electric EZGO | |||
EZgo Total Charge battery charger | Electric EZGO |