|
|
|||||||
| Lifted Golf Carts Off-Road Golf Carts. |
  |
|
|
Thread Tools | Display Modes |
08-19-2008, 09:26 AM
|
#1 |
|
Not Yet Wild
Join Date: Aug 2008
Location: Arkansas
Posts: 37
|
Why must you use 10" wheels with the Supersport lift kit ?
I'am about to purchase my supersport lift kit and have notice in the item decription that I must use 10" wheels ? Why is that ? The wheels that I want are itp ss 108 's 12 inchers and a off road type tire , not the low profiles . Thank you in advance .
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-19-2008, 10:13 AM
|
#2 |
|
Gone Wild
Join Date: Jul 2008
Location: Michigan
Posts: 192
|
Re: Why must you use 10" wheels with the Supersport lift kit ?
I'm just guessing but I would say there are probably parts of the lift that sits inside the back of the wheel and anything smaller than 10" will rub.. I have 8" wheels on my lift and if they were just 1/2" smaller things would start rubbing due to clearence issues on the back of the wheel..
Cuz |
|
|
|
|
08-19-2008, 10:45 AM
|
#3 |
|
Admin/Moderator
 Join Date: Dec 2006
Location: Ohio
Posts: 18,052
|
Re: Why must you use 10" wheels with the Supersport lift kit ?
12's should be fine. 10's would be minimum for rubbing like Cuz said.
|
|
Ron
 PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
|
|
|
|
08-19-2008, 12:07 PM
|
#4 | |
|
Gone Wild
Join Date: Mar 2008
Location: Rockwall, Texas (Dallas / Ft. Worth)
Posts: 7,077
|
Re: Why must you use 10" wheels with the Supersport lift kit ?
Quote:
|
|
|
|
|
|
08-19-2008, 02:54 PM
|
#5 |
|
Gone Wild
Join Date: Mar 2008
Location: FL
Posts: 199
|
Re: Why must you use 10" wheels with the Supersport lift kit ?
I just installed the Double "A" arm kit from CPP on my G2. Before the new wheels & tires came I put the original wheels and tires back on. The inside of the front wheels rubbed on the king pin frame. I installed a set of 10 in offset wheels and there is at least 2 1/2 inch clearance on the inside of the wheel.
|
|
|
|
|
08-20-2008, 10:03 AM
|
#6 |
|
Not Yet Wild
Join Date: Aug 2008
Location: Arkansas
Posts: 37
|
Re: Why must you use 10" wheels with the Supersport lift kit ?
thank you for all of your replies !
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Wheels and Tires in So Cal 22" paddles on Douglas, 25" Dunlop on ITP, 27" ITP's | Golf Carts and Parts | |||
| Why must you use 10" wheels with the Supersport lift kit ? | Gas Club Car | |||
| 89" Marathon with 4" lift....can I fit 23" tires??? | Electric EZGO | |||
| I want to raise my Jakes 6" lift another inch for a total of 7". | Lifted Golf Carts | |||
| 12" steel wheels | Lifted Golf Carts | |||
Linear Mode
