04-13-2021, 02:49 PM | #1 |
Gone Wild
Join Date: Oct 2012
Location: Southwestern Pa.
Posts: 6,204
|
A perplexing EZ-GO why won't this move?
I last drove my cart into my garage yesterday and all was fine. Today, after a charge, I jumped on the cart, turned on the key, hit reverse, heard the solenoid click....and nothing. NADA.....ZIP. No movement.
I turned the key off and on with no affect. I put the BMS into sleep mode and back on with no effect. I then took my MM and began to check voltage readings. A buddy was helping me with hitting the go peddle. So, I put the MM on the controller + and then the controller -, he hit the "gas" and WE GOT MOVEMENT!! The cart jumped so quickly I didn't get a voltage reading on the controller. The controller gave it's normal green flashing light to say "all is good." I took the cart for a short ride and all is well. Any thoughts on this mystery? |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
97 CC 48v will not move f\r. | Electric Club Car | |||
Won't move | Electric EZGO | |||
G29 will not move | Electric Yamaha | |||
04 ds will not move | Electric Club Car | |||
1996 Series DS 48V won't move on ground, wheels barely move on jacks | Electric Club Car |