02-05-2007, 08:36 AM | #11 |
Gone Wild
Join Date: Feb 2007
Location: Southwest Georgia
Posts: 1,469
|
Reverse questions answered
1. If you install the hi speed gears it changes forward and reverse gear ratio.
2.You can not swap positions with the original forward and reverse gears. 3. The 3/16 spacer will work, However you would need to have the clutch machined to allow it to shift farther. When you put the spacer in you will lose 3/16 of your shift profile. (The ramps will run out of travel preventing the clutch from opening all the way.) |