COWL GUARD

4x4 CC · 02-07-2007, 12:58 AM

I took my cowl guard ALL THE WAY off today. I'll need to put it on tomorow. How is the best way of doing so. How do i know which way is the front? Thanks. (
]

Aaron, shed some light.. lol

NO NO NO E-Z-GO! · 02-07-2007, 07:51 AM

Those sliding things can be a huge pain in the rear. I looked on the guard where they had been, it will be a little cleaner or shinier looking, and took a tiny amount of Liquid Nails to hold them in place until I got the bolts/screws back in them. Any thick adhesive with work, it just takes some patience. If it takes upwards of 30 minutes, you're probably doing it ok, it is a royal PITA. Don't go get a sledge hammer or something, just take your time and it will all work A OK. Someone else may have the "official" way to do it, but heck, this works, and knowing Club Cars, it probably takes some special tool, but I just do what works. :)

4x4 CC · 02-07-2007, 05:01 PM

is the snagle at the bottom go flat with the floor board od does it point down? It the front lip of the aurd rounded or angled? Thanks

NO NO NO E-Z-GO! · 02-07-2007, 05:15 PM

Quote:

Originally Posted by 4x4 CC

is the snagle at the bottom go flat with the floor board od does it point down? It the front lip of the aurd rounded or angled? Thanks

I'll answer you if you tell me what a snagle and aurd are.

4x4 CC · 02-07-2007, 11:08 PM

angle

NO NO NO E-Z-GO! · 02-07-2007, 11:32 PM

The bottom of the guard runs parallel to the rocker top.

4x4 CC · 02-09-2007, 02:03 AM

like this?

\ \
\.....\

NO NO NO E-Z-GO! · 02-09-2007, 08:13 AM

I don't know if this is what you're talking about or not, but here you go

4x4 CC · 02-09-2007, 03:05 PM

oh, then why do my holes not line up?

NO NO NO E-Z-GO! · 02-09-2007, 04:27 PM

Quote:

Originally Posted by 4x4 CC

oh, then why do my holes not line up?

You have to move the sliders until they do. It was on there before, so I assure you it will go back, it just takes a little time and is a bit nerve racking.

02-07-2007, 12:58 AM	#1
4x4 CC Frog Hunter Join Date: Dec 2006 Location: Little Rock, Ar Posts: 1,161	COWL GUARD I took my cowl guard ALL THE WAY off today. I'll need to put it on tomorow. How is the best way of doing so. How do i know which way is the front? Thanks. ( ] Aaron, shed some light.. lol

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

02-07-2007, 07:51 AM	#2
NO NO NO E-Z-GO! Gone Wild Join Date: Dec 2006 Location: ComplainAboutNoNo'sProfile-Ville Posts: 4,995	Those sliding things can be a huge pain in the rear. I looked on the guard where they had been, it will be a little cleaner or shinier looking, and took a tiny amount of Liquid Nails to hold them in place until I got the bolts/screws back in them. Any thick adhesive with work, it just takes some patience. If it takes upwards of 30 minutes, you're probably doing it ok, it is a royal PITA. Don't go get a sledge hammer or something, just take your time and it will all work A OK. Someone else may have the "official" way to do it, but heck, this works, and knowing Club Cars, it probably takes some special tool, but I just do what works. :)

02-07-2007, 05:01 PM	#3
4x4 CC Frog Hunter Join Date: Dec 2006 Location: Little Rock, Ar Posts: 1,161	is the snagle at the bottom go flat with the floor board od does it point down? It the front lip of the aurd rounded or angled? Thanks

02-07-2007, 11:08 PM	#5
4x4 CC Frog Hunter Join Date: Dec 2006 Location: Little Rock, Ar Posts: 1,161	angle

02-07-2007, 11:32 PM	#6
NO NO NO E-Z-GO! Gone Wild Join Date: Dec 2006 Location: ComplainAboutNoNo'sProfile-Ville Posts: 4,995	The bottom of the guard runs parallel to the rocker top.

02-09-2007, 02:03 AM	#7
4x4 CC Frog Hunter Join Date: Dec 2006 Location: Little Rock, Ar Posts: 1,161	like this? \ \ \.....\

02-09-2007, 08:13 AM	#8
NO NO NO E-Z-GO! Gone Wild Join Date: Dec 2006 Location: ComplainAboutNoNo'sProfile-Ville Posts: 4,995	I don't know if this is what you're talking about or not, but here you go

02-09-2007, 03:05 PM	#9
4x4 CC Frog Hunter Join Date: Dec 2006 Location: Little Rock, Ar Posts: 1,161	oh, then why do my holes not line up?