|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
11-11-2015, 09:05 AM | #1 |
Not Yet Wild
Join Date: Oct 2015
Location: Marietta Ohio
Posts: 17
|
G16 clutch opinions
Hi new here. I have a g16 that's stock as of now except I removed the governor. The rollers in the clutch have flat spots. So should I rebuild the clutch or get a new comet clutch. I plan on doing a lift maybe 6". Just want to get everything in good working order first. Thanks for any advice.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-11-2015, 09:44 AM | #2 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: G16 clutch opinions
Sounds like all you need is a "roller/pin" kit. Although, you will need the special tool for removing the clutch from the crank.
|
11-11-2015, 01:12 PM | #3 |
Not Yet Wild
Join Date: Oct 2015
Location: Marietta Ohio
Posts: 17
|
Re: G16 clutch opinions
Thanks small block. Just was pondering which was the best way to get the most power.
|
11-11-2015, 08:36 PM | #4 |
Not Yet Wild
Join Date: Oct 2015
Location: Marietta Ohio
Posts: 17
|
Re: G16 clutch opinions
What gives no other opinions.
|
11-11-2015, 08:49 PM | #5 |
Getting Wild
Join Date: Mar 2013
Location: Tallassee,Alabama
Posts: 141
|
Re: G16 clutch opinions
I would rebuild the clutch.As Smallblock said you will need a tool to remove the clutch no matter if you rebuild it or buy another . Rebuilding will help with the cart taking off better but for more power I would suggest Plowman's performance kit. I bought one from him for my G14. It came with larger carb jets,his muffler,new belt,complete secondary clutch ,and a new spring he recommended according to what you tell him would be your use of the cart.I wanted something to pull hills better in the woods and had more power.
|
11-11-2015, 10:56 PM | #6 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: G16 clutch opinions
When Mr. Block speaks, no other comments need be said!!
|
11-12-2015, 09:53 AM | #7 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: G16 clutch opinions
|
11-12-2015, 11:37 AM | #8 |
It's Beer Time!
Join Date: Sep 2010
Location: Vineland, NJ
Posts: 1,462
|
Re: G16 clutch opinions
|
11-12-2015, 12:34 PM | #9 |
Not Yet Wild
Join Date: Oct 2015
Location: Marietta Ohio
Posts: 17
|
Re: G16 clutch opinions
Thanks guys. I'm taking notes. Bam that's what I'm looking for as well. I've been reading the different post about clutches and do's and do nots. So much info not sure if my little brain can handle all of it. Once again thanks guys for your advice.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Team: Rapid Response Roller Clutch Opinions | Big Block Talk! | |||
1994 EZGO Engine/Clutch Shot and Need Opinions | Gas EZGO | |||
Opinions anyone? | Gas EZGO | |||
need opinions on drive clutch options | Gas Yamaha | |||
16hp Duromax swap, need opinions on clutch | Clone Engine Swaps |