|
|
|||||||
| Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
07-31-2017, 06:23 PM
|
#1 |
|
Not Yet Wild
Join Date: Jul 2017
Posts: 6
|
Alltrax install makes cart go SLOW
I just installed in all tracks for hundred amp controller that's been dial back the 300 amp. I got everything hooked up and initially it was going in reverse when I wanted to go forward so I had to switch the wires around. But now it goes about 5 miles an hour, which is super slow. What could be wrong?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-31-2017, 06:37 PM
|
#2 |
|
Not Yet Wild
Join Date: Jul 2017
Location: culiacan mexico
Posts: 34
|
Re: Alltrax install makes cart go SLOW
Unable the speed sensor limit
Enviado desde mi SGH-I337M mediante Tapatalk |
|
|
|
|
07-31-2017, 06:48 PM
|
#3 |
|
Getting Wild
Join Date: Mar 2012
Location: Central Illinois
Posts: 146
|
Re: Alltrax install makes cart go SLOW
I believe another member had a similar issue. I think his problem was some bent pins on the big plug of the controller.
|
|
|
|
|
07-31-2017, 07:45 PM
|
#4 |
|
Not Yet Wild
Join Date: Jul 2017
Posts: 6
|
Re: Alltrax install makes cart go SLOW
Seemed like it was the rpm setting was checked. I unchecked it and it goes 20-22 MPH!
|
|
|
|
|
07-31-2017, 08:48 PM
|
#5 |
|
Gone Wild
 Join Date: Apr 2015
Location: NorCal
Posts: 718
|
Re: Alltrax install makes cart go SLOW
What was the max RPM setting to begin with?
|
|
|
|
|
08-01-2017, 06:12 AM
|
#6 | |
|
Not Yet Wild
Join Date: Jul 2017
Posts: 6
|
Re: Alltrax install makes cart go SLOW
Quote:
|
|
|
|
|
|
08-01-2017, 06:19 AM
|
#7 | |
|
Getting Wild
Join Date: Mar 2012
Location: Central Illinois
Posts: 146
|
Re: Alltrax install makes cart go SLOW
Quote:
|
|
|
|
|
|
08-01-2017, 07:53 AM
|
#8 |
|
Not Yet Wild
Join Date: Jul 2017
Posts: 6
|
Re: Alltrax install makes cart go SLOW
I don't know how it could have been going 6000 RPM because it was going about 1/2 speed it was when it was stock. Hopefully today I can monitor parameters while driving to see what actual RPM is at.
|
|
|
|
|
08-01-2017, 08:00 AM
|
#9 | |
|
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Alltrax install makes cart go SLOW
Quote:
Make sure the speed sensor is plugged in, if it is plugged in, it is not working (sending pulses). |
|
|
|
|
|
08-01-2017, 06:33 PM
|
#10 |
|
Not Yet Wild
Join Date: Jul 2017
Posts: 6
|
Re: Alltrax install makes cart go SLOW
Does the stock controller use the speed sensor? Just wondering why installing alltrax controller would've made the sensor go bad unless it's been bad for a while.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Alltrax XTC install IQ | Electric Club Car | |||
| Alltrax XCT 500 Amp install | Electric Club Car | |||
| Alltrax xct install | Electric Club Car | |||
| Alltrax install in G22? | Extreme DC! | |||
| help with alltrax DCX install | Electric Club Car | |||
Linear Mode
