Ez-Go Tow Truck Modification

[rodrocket]

Originally Posted by codycthn

well I have been looking for a motor for mine (just 36 volt) and was debating the beast or the d&d version same price and d&d has a little more hp so id go with it im ordering mine from eastcoastcustomcartsinc.com part # ddes5226, ill let you know how I like mine once I get it

awsome: thats what i wanted to here

will you be staying with 36 Volt or are you going to upgrade the voltage aswell

info on modified golf carts is very limited here in Australia as not many people modify them & i appreciate any help that i can get

all i want to do with it is use it to tow my car as can be seen in my avitar

regards
rod

[codycthn]

im eventually going to upgrade voltage but just motor for now because all I do is ride around the neighborhood maybe some nascar races/football thats about it but to pull that car I would do both btw that is one bad a** car man you should paint your cart to match it

[rodrocket]

thanks for the reply

yes the car is a "Little Bad ***" i am almost finnished with it & almost time to go racing hence the reason why i am now playing with the cart

let me know what motor you go with & how it goes

if i can get away with leaving it 36 volt then i will leave it but if the upgrade is nessacerry then i will do it

all i want is for the cart to be able to pull my car back from the bottom of the track without any stress, i wont be racing the cart or doing anything like that

regards
rod

[MuayThai41]

I pull around 2500lb. trailers with a bone stock 36v ezgo. It works but i would upgrade to 48v if i were you. If you can do the controller, etc then that would be great. You won't have the tongue weight issues that i have, but HD springs for the rear would come in very handy.

[MuayThai41]

Forgot to add this...

[rodrocket]

Originally Posted by MuayThai41

I pull around 2500lb. trailers with a bone stock 36v ezgo. It works but i would upgrade to 48v if i were you. If you can do the controller, etc then that would be great. You won't have the tongue weight issues that i have, but HD springs for the rear would come in very handy.

thanks for that, i am happy to change whatever is required i just dont want to change things that are not needed to be changed & more importantly i only want to make the change once

as i need to bring most of these parts into Australia from the US i dont want to bring something in & it turns out not suitable for my application

really appreciate the help

regards
rod

[codycthn]

well when I get the motor ill put my dads corvette in neuteral and pull it around the yard for a test but he would probably disown me

[tonyton]

I want to see pictures of the CAR! I know what golf carts look like.... I'm sure you will paint the two to match, correct??
You're teasing us with the avatar......Show us the big block!

[rodrocket]

Originally Posted by tonyton

I want to see pictures of the CAR! I know what golf carts look like.... I'm sure you will paint the two to match, correct??
You're teasing us with the avatar......Show us the big block!

dont have many new pictures but here are a couple & if you want more there is pictures from the begining in my photobucket account

[IMG][/IMG]

[IMG][/IMG]

[rodrocket]

photobucket can be accessed here

http://s5.photobucket.com/albums/y17...ocket/Pontiac/

you can go through the sub albums on the side

the car is a big cube small block

Don Ness molly chassis & carbon body

regards
rod