|
Gas Club Car Gas DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
09-20-2010, 06:51 PM | #11 |
Not Yet Wild
Join Date: Sep 2010
Posts: 1
|
Re: New ignition switch ran fine now doesnt..
I`m new to this cart thing and just purchased a 2002 CC DS yesterday, so correct me if I`m wrong...
From what I see in the nicely posted wiring diagrams this site provides The White and White/Black wires your refering to are for the following... White gets powered with 12Vdc when key is ON and power flows through FWD/REV Micro#1 then the pedal limit switch for "start" then engerizes the solenoid and engine "cranks". White/Black gets powered with 12Vdc when key is ON and power flows through pedal limit switch for shutting engine off but with the pedal depressed power flows to the ignition coil and creates the spark to run the engine. Not sure if this is correct or not just how I read the very small print drawing. Golf Cart 32 |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-20-2010, 07:08 PM | #12 |
Gone Wild
Join Date: Oct 2009
Location: Lee County, Georgia
Posts: 521
|
Re: New ignition switch ran fine now doesnt..
This one may be a little bigger, it's for a 2001 2002 Club Car.
Jimmie |
09-21-2010, 08:40 PM | #13 |
Not Yet Wild
Join Date: Aug 2010
Location: VA
Posts: 60
|
Re: New ignition switch ran fine now doesnt..
Schematic makes sense to me jus don't understand how I could drive so long with the white wires disco'd.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Golf cart runs/starts fine but then it doesnt | Gas EZGO | |||
need ignition switch for G3 | Golf Carts and Parts | |||
Just got a G9 need to know how to wire ignition switch to push pull switch ASAP! | Gas Yamaha | |||
Ignition Switch | Big Block Talk! | |||
Ignition switch fir B/S 20 hp | Big Block Talk! |