|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
01-26-2011, 08:42 PM | #1 |
Gone Wild
Join Date: Nov 2009
Location: Illinois
Posts: 171
|
Need Help Please!!! Carb jet size
Alright guys down to the last step before the new motor is ready to go in and still havent figured out a definite answer to what size jet a 350 carb has. I have this one apart and it looks to be either a 90 could possibly be an 80 though does either of these jets sound correct. If someone could verify this for me I would greatly appreciate it, I have searched high and low and the only answer I have found is that somebody thought it was a 90 in which case would be what I have but I am almost positive this carb came off a 295 which is why I dont think it is right.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-27-2011, 05:56 AM | #2 |
Romans 1 : 16 Unashamed
Join Date: Dec 2010
Location: Scuffletown, SC
Posts: 484
|
Re: Need Help Please!!! Carb jet size
The service manual for my cart says the 295 comes with an 80 stock, and the 350 comes with an 85. Don't know if that's what you need for your setup though.
|
01-27-2011, 06:26 AM | #3 |
Getting Wild
Join Date: Apr 2010
Location: los angeles
Posts: 126
|
Re: Need Help Please!!! Carb jet size
Depends on the altitude.
|
01-27-2011, 07:10 AM | #4 |
Doin' the Wild Thang
Join Date: Mar 2010
Location: Greenville, AL
Posts: 1,063
|
Re: Need Help Please!!! Carb jet size
I have seen a #90 and #92 come out of a 350 and either will work in the 350 carb.. If you are using the 295/350 setup you will probably need the larger of the two jets.
|
01-27-2011, 07:13 AM | #5 |
Gone Wild
Join Date: Nov 2009
Location: Illinois
Posts: 171
|
Re: Need Help Please!!! Carb jet size
Well the elevation here looks to be around 500-600ft above sea level can anyone tell me what jet would go in a stock 350 at that altitude?
Also where can I find jets for this carb, I have all kinds of jets for holley carbs but dont have a clue where to find them for this thing! |
01-27-2011, 07:22 AM | #6 |
Doin' the Wild Thang
Join Date: Mar 2010
Location: Greenville, AL
Posts: 1,063
|
Re: Need Help Please!!! Carb jet size
Blue, I'm not sure of the stock size per the altitude. I can tell you if you have a #80, it won't work properly in the 350. Sorry I can't be more help.
|
01-27-2011, 01:00 PM | #7 |
Gone Wild
Join Date: May 2008
Location: Netherlands (Europe)
Posts: 170
|
Re: Need Help Please!!! Carb jet size
Hello Blue,
You can get your jets in a shop for gardenmachinery like lawnmowers. Your carb is a Keihin or Mikuni also to be found on Honda GX, Robin, B&S etc. As far as i know are there two different ones of each. On my Mikuni / Jet is the size at the crown of the jet. (122.5 to 130 on my engine) Another place could be in a racekartshop with B&S engines. Benno |
01-28-2011, 08:45 AM | #8 |
Gone Wild
Join Date: Nov 2009
Location: Illinois
Posts: 171
|
Re: Need Help Please!!! Carb jet size
Subaru I looked up jets for the two brand of carbs you mentioned online and didnt find anything that looks anything like the jet out of the ezgo carb.
Here is a link to the jet I need but my god that much for a main jet?!?! http://www.shopezgo.com/products/Hig...roduct_id=3493 |
01-28-2011, 09:21 AM | #9 |
Not Yet Wild
Join Date: Dec 2010
Location: Minneapolis, Kansas
Posts: 66
|
Re: Need Help Please!!! Carb jet size
Sometimes when you wanna play you gotta pay!
|
01-28-2011, 09:54 AM | #10 |
Gone Wild
Join Date: Nov 2009
Location: Illinois
Posts: 171
|
Re: Need Help Please!!! Carb jet size
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Rim Size | Lifted Golf Carts | |||
91 2 Cycle Carb Missing Carb Screw | Gas EZGO | |||
What Size | Electric Club Car | |||
G1 Carb. jet on outside of carb ? What the Heck ? | Gas Yamaha | |||
pic size | Test Post |