shifting to reverse

hello · 04-21-2013, 05:17 PM

Hi guys I have 2000 g16 with a 6 inch lift before I lifted it the shifting from forward to reverse was fine now after lifting it going in to reverse is really stiff is there place to adjust the cable .

Thanks

pachanga90 · 04-21-2013, 07:23 PM

Check to see if one of the cables is kinked or binding.They both need to work freely for it to shift properly.Sometimes,you need to unhook a cable-clamp and let the cable relax,it may be under tension.I can't remember what I did on my Wifes' G16 last year.

sho305 · 04-21-2013, 09:38 PM

The older carts adjust at the shifter I don't recall on that one. But Pachanga is right likely something is moved and pulled a cable tight or against something. Check the cables and try to re-adjust how they sit and take any sharp bends out of them. I had to do this just putting a clone in my lifted G9 as it hit the cables at the trans.

hello · 04-22-2013, 05:51 PM

Thanks I will look at it on the weekend.

LakeNut · 04-22-2013, 06:03 PM

Did you check if it shifts normally when off? If it shifts normally when off, have you checked that it is idling low enough? Or that the belt isn't too tight/short?

hello · 04-22-2013, 06:17 PM

I don't have a big block I wait till the motor is stopped before I shift

04-21-2013, 05:17 PM	#1
hello Gone Wild Join Date: Sep 2010 Location: ontario Posts: 182	shifting to reverse Hi guys I have 2000 g16 with a 6 inch lift before I lifted it the shifting from forward to reverse was fine now after lifting it going in to reverse is really stiff is there place to adjust the cable . Thanks

04-21-2013, 07:23 PM	#2
pachanga90 I Refuse To Get Stuck!!! Join Date: Jun 2010 Location: Hilton,NY Posts: 5,427	Re: shifting to reverse Check to see if one of the cables is kinked or binding.They both need to work freely for it to shift properly.Sometimes,you need to unhook a cable-clamp and let the cable relax,it may be under tension.I can't remember what I did on my Wifes' G16 last year.

04-21-2013, 09:38 PM	#3
sho305 Vegas modded 420 Join Date: Jun 2009 Location: West MI Posts: 15,445	Re: shifting to reverse The older carts adjust at the shifter I don't recall on that one. But Pachanga is right likely something is moved and pulled a cable tight or against something. Check the cables and try to re-adjust how they sit and take any sharp bends out of them. I had to do this just putting a clone in my lifted G9 as it hit the cables at the trans.

04-22-2013, 05:51 PM	#4
hello Gone Wild Join Date: Sep 2010 Location: ontario Posts: 182	Re: shifting to reverse Thanks I will look at it on the weekend.

04-22-2013, 06:03 PM	#5
LakeNut Not Yet Wild Join Date: May 2011 Posts: 32	Re: shifting to reverse Did you check if it shifts normally when off? If it shifts normally when off, have you checked that it is idling low enough? Or that the belt isn't too tight/short?
LakeNut Not Yet Wild Join Date: May 2011 Posts: 32

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

04-22-2013, 06:17 PM	#6
hello Gone Wild Join Date: Sep 2010 Location: ontario Posts: 182	Re: shifting to reverse I don't have a big block I wait till the motor is stopped before I shift

Similar Threads
Thread	Forum
faster shifting bb	Big Block Talk!
cart shifting like a car?	Golf Cart Racing
Shifting.	Gas Yamaha
Shifting	Gas Yamaha