|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
06-07-2007, 12:12 PM | #1 |
Not Yet Wild
Join Date: Jun 2007
Location: Walnut Creek, California
Posts: 52
|
K&N Air Filter
I was Just Wondering What Type of K&N Air Filter I would Need to Put on My Yamaha G8....I know Gary Has one on His and I wanted to so the same thing. Also What would be the performance advantages? are they noticeable? what would the price be as well....thanks guys just let me know
-Mario |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-07-2007, 12:18 PM | #2 |
Gone Wild
Join Date: Dec 2006
Location: ComplainAboutNoNo'sProfile-Ville
Posts: 4,995
|
I think you would want to get carburetor jets also, with just the intake it may run lean and rough.
|
06-07-2007, 12:24 PM | #3 |
Admin
Join Date: Dec 2006
Location: TN
Posts: 101,873
|
If you go with the cone type K&N filter, you will have to jet the carb. You can drill out your stock jet if you prefer: .046 if I remember correctly.
|
06-07-2007, 12:50 PM | #4 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,055
|
Jet size would be .046 - .048 and the K&N p/n is R1050 or R1080.
Hey Gary, did I finally remember these p/n's right this time?? Mario, you will notice a nice increase in power and speed!!! |
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
06-07-2007, 12:54 PM | #5 |
Not Yet Wild
Join Date: Jun 2007
Location: Walnut Creek, California
Posts: 52
|
thanks guys I am deff going to look into it....how much do you think the cone style filter would be? or how much would the whole setup cost?
|
06-07-2007, 12:58 PM | #7 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,055
|
The filter I used was straight shape and I believe it was around $40.
Check here for jets if you don't want to drill yours. http://cartpartsplus.com/product_inf...6209858ca2012a |
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
06-07-2007, 01:00 PM | #8 |
Admin
Join Date: Dec 2006
Location: TN
Posts: 101,873
|
For that price, I would purchase it just in case you ever want to go back to stock.
|
06-07-2007, 01:02 PM | #9 |
Gone Wild
Join Date: Dec 2006
Location: ComplainAboutNoNo'sProfile-Ville
Posts: 4,995
|
Aren't those jets for a 301cc, Ron? The G8 is a 285, right? You're probably right 'cause I don't know jack about Yamahas.
|
06-07-2007, 01:29 PM | #10 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,055
|
To be safe, I would just talk to Tom @ CPP. I'm sure he has the right jet
for the G8. |
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|