|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
06-21-2012, 02:14 PM
|
#1 |
|
Not Yet Wild
Join Date: May 2010
Location: ms
Posts: 17
|
Club Car Series Controller + EZGO Series Wound Motor
Is is possibble to use these two together? I would be using the 5k to 0 throttle input that matches with the Silver Curtis controller off a 96' 48 volt club car. The motor is currently mounted on a 98 TXT Series EZGO cart. Basically I want to put the club car controller and throttle on the EZGO cart. Am I insane or is it possible to make it work?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-21-2012, 02:18 PM
|
#2 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 73,712
|
Re: Club Car Series Controller + EZGO Series Wound Motor
Series is series, it will work. But check that controller size. Ezgo is heavier than CC and used a minimum of 275 amps to play golf. you may have a 225 or 250 amp control? ... anything else will require more power.
|
|
|
|
|
06-21-2012, 02:53 PM
|
#3 |
|
Not Yet Wild
Join Date: May 2010
Location: ms
Posts: 17
|
Re: Club Car Series Controller + EZGO Series Wound Motor
Scotty B, i forgot to mention the EZGO Motor is a 36 volt motor. It will be running on a 48 volt system. The controller came off the 48 volt cart and is the 225 amp one. So will this setup work? Or still need more power?
|
|
|
|
|
06-21-2012, 03:03 PM
|
#4 | |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,712
|
Re: Club Car Series Controller + EZGO Series Wound Motor
Quote:
That makes a difference. While much smaller than anything I would recommend... if you are determined to use parts on hand ... it will work. It may not be impressive off the line or up the hill but, it will produce about 16 mph in a stock cart on the flat ground. |
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| What is the biggest amp controller I can use with my TXT Series stock motor? | Lifted Golf Carts | |||
| retrofit '86 series-wound motor from resistor-controller to...? | Electric EZGO | |||
| EZGO TXT 36V Series - OEM Controller / Motor | Golf Carts and Parts | |||
| OBCs, EZGO Series Controller, IQ Motor | Golf Carts and Parts | |||
| EZ-go Marathon series or shunt wound motor? | Electric EZGO | |||
Linear Mode
