|
09-13-2009, 10:29 PM | #1 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,344
|
KF82 Engine torque specs
Thought I had it
I need the engine torque specs for the old 341 Flathead Thank you in advance if you can post them or link me to em |
09-14-2009, 09:34 AM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,344
|
Re: KF82D Need Engine torque specs
There were about 500,000 of these engines built somebody has to have the repair manual....? Well I couldn't find the info on the net? Guess I will have to go with torque recommendations for specific size bolts?
|
09-14-2009, 10:50 AM | #3 |
Not Yet Wild
Join Date: Jul 2009
Location: Northwest Washington
Posts: 67
|
Re: KF82D Need Engine torque specs
cylinder head bolts 16-18 ft-lbs
cylinder bolts 25-29 '' '' connecting rod bolts 29-30 '' '' side cover bolts 14-16 '' '' flywheel nut 60-65 '' '' spark plug 15-20 '' '' crankcase bolts 14-16 '' '' cylinder head shroud 8-10 '' '' engine mounting nuts 25-30 '' '' Anything else ? |
08-17-2011, 06:22 PM | #4 | |
Not Yet Wild
Join Date: Jun 2011
Posts: 10
|
Re: KF82D Need Engine torque specs
Quote:
Thanks |
|
08-17-2011, 11:52 PM | #5 |
Gone Wild
Join Date: Jul 2011
Location: SE KS
Posts: 269
|
Re: KF82 Engine torque specs
Manual says .004 to .008 clearance.
Jason |
08-18-2011, 06:40 AM | #6 |
Not Yet Wild
Join Date: Jun 2011
Posts: 10
|
Re: KF82 Engine torque specs
Is that on both valves? .004 to .008 or .004 intake and .008 exhaust. Sorry to be so specific. Just wanting to be sure. Thanks
|
09-16-2018, 07:44 PM | #7 | |
Not Yet Wild
Join Date: May 2014
Location: Smoky Mountains
Posts: 31
|
Re: KF82 Engine torque specs
Quote:
|
|
10-10-2019, 07:20 PM | #8 |
Not Yet Wild
Join Date: May 2014
Location: Smoky Mountains
Posts: 31
|
Re: KF82 Engine torque specs
I would guess the lack of a reply would indicate there is no bolt in replacement.
To bad. What is the strongest later club car that sits low like the DS? I need low for going across steep hills laterally. |
12-03-2019, 10:08 AM | #9 |
Gone Wild
Join Date: Aug 2017
Location: Doradotown,Fl.
Posts: 154
|
Re: KF82 Engine torque specs
I am putting together my '91 kf82 as we speak , thanks for the torque specs.
|
05-25-2017, 07:01 PM | #10 |
Not Yet Wild
Join Date: Apr 2017
Posts: 2
|
Re: KF82D Need Engine torque specs
yes! can you tell me what the pto shaft diameter is for this motor? A friend and I are replacing one on a "91 CC and want to use the stock clutch/torque converter system! ANY help would be appreciated! Thanks! God Bless!
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
torque specs | Gas EZGO | |||
Online torque specs | Gas Yamaha | |||
need kf82 crank specs | Gas Club Car | |||
torque specs for Yamaha G14 | Gas Yamaha | |||
need engine specs for KF82-FZ340 | Gas Club Car |