|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-04-2016, 08:35 PM | #11 |
Gone Wild
Join Date: Sep 2015
Posts: 572
|
Re: %^*@# ezgo hub !!!!
Here you go!
Edit just for your information, no puller was going to pull this off and make it useable. Even though I "saved" the axle, it had to be replaced. The splines had rusted to the hub. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-04-2016, 09:03 PM | #12 |
Guest
Posts: n/a
|
Re: %^*@# ezgo hub !!!!
that is an option
|
05-04-2016, 09:34 PM | #13 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: %^*@# ezgo hub !!!!
A brazing torch may have save the axle and drum
|
05-04-2016, 09:37 PM | #14 |
Guest
Posts: n/a
|
Re: %^*@# ezgo hub !!!!
i tried heat .. all most an hour before the gas ran out
|
05-04-2016, 10:07 PM | #15 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: %^*@# ezgo hub !!!!
|
05-04-2016, 10:29 PM | #16 |
Guest
Posts: n/a
|
Re: %^*@# ezgo hub !!!!
nope ... not at all
i think it moved with the puller but not sure i tried hammering it in while heated , it did not move even applied heat and pulled it with puller and an impact gun nothing i had removed the the brake cable and got the star wheel all the way in soaked the splines with P B Blaster half a can over 6 hours |
05-04-2016, 10:43 PM | #17 |
going,.. going,.. gone!
Join Date: Apr 2014
Location: Third Rock from the Sun...Vegas baby!
Posts: 1,422
|
Re: %^*@# ezgo hub !!!!
Nothing against PB Blaster.....used it many times....but
if you can get a hold of some Kroil, you wont use PB again. The stuff is pretty amazing. |
05-04-2016, 10:50 PM | #18 |
DS Drivers Club Founder
Join Date: Jul 2013
Location: Upstate NY
Posts: 3,428
|
Re: %^*@# ezgo hub !!!!
I learned of a trick not too long ago for trying to free up stuff that is bound up with rust. Heat it almost red hot with a torch or the like, then immediately pour cold water over what you're trying to break free. The rapid contraction of the metal breaks the rust
|
05-04-2016, 11:16 PM | #19 |
Voltaholic
Join Date: Dec 2013
Location: Close to Navasota Texas
Posts: 934
|
Re: %^*@# ezgo hub !!!!
Come on Crash! We all know how to get an EZGO hub off!
#1 Put the wheels back on. #2 Put the cart in reverse. #3 Floor IT! #4 Once your at maximum reverse speed, put it in forward and floor it! #5 Your hub is now stripped out! It may have fallen off the cart already! #6 Install new ausco hub and enjoy your cart! LOL! |
05-04-2016, 11:19 PM | #20 |
Voltaholic
Join Date: Dec 2013
Location: Close to Navasota Texas
Posts: 934
|
Re: %^*@# ezgo hub !!!!
On a serious note, good luck with the stubborn hub!
|