lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 07-19-2016, 06:29 PM   #1
rockfordpi
Gone Wild
 
Join Date: May 2016
Location: Central Alabama
Posts: 822
Default Frame/Suspension Compatibility 84 model with 92 model TXT

Does anyone know if the rear suspension and engine unit from an 84 ezgo TXT (robbins 295 engine) will be a direct fit to a 92 or 93 ezgo txt frame/body?

On both models, the frame connects to the rear suspension in two places with a bolt and bushing on each side that allows the rear suspension to pivot up and down.

I have 84 TXT with badly rusted front frame and have found both a 92 and 93 body and chassis for a very good price. However, they are a 200 mile drive away drive and I wanted to be sure they are a direct fit before I make the trip.

I want to be able to disconnect the two pivot bolts and shocks and coil springs and remove the engine and suspension and bolt that unit to another frame/body without a lot of re-engineering .
rockfordpi is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 07-20-2016, 12:45 AM   #2
rockfordpi
Gone Wild
 
Join Date: May 2016
Location: Central Alabama
Posts: 822
Default Re: Frame/Suspension Compatibility 84 model with 92 model TXT

Correction, it is a 244 cc and a marathon, not a TXT
rockfordpi is offline   Reply With Quote
Old 07-20-2016, 07:39 PM   #3
geer hed
Not Yet Wild
E-Z-GO
 
Join Date: Jun 2016
Location: Pocono Summit, near Pocono Raceway
Posts: 60
Default Re: Frame/Suspension Compatibility 84 model with 92 model TXT

I read someplace on another post that the rear frame section from a 91 or 92 should bolt right up, but other years would need some modifications.

If you can get the seller to take some accurate measurements, and possibly even take some pictures of the mounts, then measure yours, it would give you a better idea as to whether it will fit or not.
geer hed is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
Identify this suspension model Lifted Golf Carts
Gas / Electric suspension compatibility Gas Club Car
G2 - Understanding Frame/Suspension Bushings Gas Yamaha
B&S model ID help Big Block Talk!
precedent model vs ds model Gas Club Car


All times are GMT -5. The time now is 06:06 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.