04-28-2011, 07:49 PM | #1 |
Not Yet Wild
Join Date: Jul 2009
Location: Lake Orion, MI
Posts: 48
|
linkage question
Ok I installed the six inch lift, everything is ok but... I noticed when I put some people on the back, the linkage binds up and I can`t shift from forward to reverse. I looked and the linkage gets squished by the frame ( rear shock mount ) Doe sanybody have a prooven way to reroute the linkage cable?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-30-2011, 10:25 PM | #2 |
just leave me alone
Join Date: Aug 2008
Location: Tennessee
Posts: 5,643
|
Re: linkage question
check with the site sponsors at the top I think CPP sells a extended cable.
|
05-01-2011, 12:26 AM | #3 |
Gone Wild
Join Date: Jan 2007
Location: La Porte Indiana
Posts: 1,392
|
Re: linkage question
he is refering to the shifter cable, not the brake cable.
i just took mine off and gave it a bit more bend so it clears the frame. it is a bit closer to the muffler but it hasn't melted it in a couple years of use. I did have the advantage of having the correct tubing bender at work, but i have done them in the past slowly by hand. |
05-01-2011, 09:35 AM | #4 |
just leave me alone
Join Date: Aug 2008
Location: Tennessee
Posts: 5,643
|
Re: linkage question
Ahhh , need to learn to read
|
05-01-2011, 12:39 PM | #5 | |
Not Yet Wild
Join Date: Jul 2009
Location: Lake Orion, MI
Posts: 48
|
Re: linkage question
Quote:
I removed the bolts and lowered it by only using one bolt to hold the bracket in place right now. |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
WTB G1 linkage | Golf Carts and Parts | |||
95 EZ Go FR linkage | Electric EZGO | |||
G1 exhaust linkage question | Gas Yamaha | |||
Finally the linkage | Gas Yamaha | |||
G1 gas linkage | Gas Yamaha |