|
Big Block Talk! Everything about swapping a big block engine into your cart! |
|
Thread Tools | Display Modes |
03-24-2009, 03:32 PM | #1 |
Gone Wild
Join Date: Aug 2008
Location: fairfield ca
Posts: 258
|
comet spacer
ok just got my comet 780.fits good but looks like i need some sort of spacer,right?was it suppose to come with something or do i just figure something out
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-24-2009, 06:20 PM | #2 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,052
|
Re: comet spacer
Yep, you need to come up with a spacer.
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
03-24-2009, 08:20 PM | #3 |
Gone Wild
Join Date: Aug 2008
Posts: 178
|
Re: comet spacer
Hmmm, I have a 780 coming my way also. Splain to me Lucy, what's going on here and what type of spacer do I need to create?
|
03-24-2009, 08:32 PM | #4 |
NOT a Sponsor
Join Date: Jan 2009
Location: So CAL
Posts: 2,147
|
Re: comet spacer
the clutch we use doesnt need a spacer
|
03-24-2009, 09:02 PM | #5 |
Gone Wild
Join Date: Feb 2007
Location: Southwest Georgia
Posts: 1,469
|
Re: comet spacer
Actually all clutches need a spacer, Just some clutches have the spacer made on to them. However even then the way the crankshaft is made will determine clutch placement and with different engines different spacers are required to position clutch where you want it.
|
03-24-2009, 09:17 PM | #6 |
Gone Wild
Join Date: Aug 2008
Posts: 178
|
Re: comet spacer
Thank you Sir! Does anyone have any pictures of this to help others understand?
Mike |
03-24-2009, 09:24 PM | #7 |
Gone Wild
Join Date: Aug 2008
Location: fairfield ca
Posts: 258
|
Re: comet spacer
i figured a couple meaty washers and a peice of steel tubing,1.0 i.d. of course.should work right?
|
03-24-2009, 09:53 PM | #8 | |
Gone Wild
Join Date: Feb 2009
Location: P-COLA
Posts: 1,176
|
Re: comet spacer
Quote:
If possible, try to find a DOM tube and cut to size, or get it machined out of solid bar. My 2 cents... |
|
03-25-2009, 01:37 PM | #9 |
NOT a Sponsor
Join Date: Jan 2009
Location: So CAL
Posts: 2,147
|
Re: comet spacer
we use the 1190/1195 comet clutch and theres no spacer need on the 23 briggs and 24 honda
we like running this bigger clutch with a briggs with cams and rev kit 25" tall tires we have gps at 45mph on our limo carts |
03-25-2009, 08:17 PM | #10 |
Not Yet Wild
Join Date: Jan 2009
Posts: 35
|
Re: comet spacer
this is what i used its called a lock collar, i bought it at a bearing specialist store. kaman bearings...
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Comet 780 Help | Big Block Talk! | |||
Wheel Spacer Question | On Road Golf Carts! | |||
Wheel Spacer Opinions | Lifted Golf Carts | |||
Comet 780 clutch | Gas EZGO |