|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
02-24-2018, 04:59 PM | #1 |
Not Yet Wild
Join Date: Feb 2018
Posts: 2
|
Cart will not move unless pushed.
I have a 2007 48 volt golf cart. When I press the gas pedal nothing happened. The cart will not move. all battery are good. Solenoid will click but nothing happened. And when it does go after the push, it will surge. Like it loses power for a second and then will go again, over and over again.
Any advice would be greatly appreciated. Kevin |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-24-2018, 05:39 PM | #2 |
A Gal with a Cart!
Join Date: Aug 2015
Location: Northeast in the Republic of Texas
Posts: 462
|
Re: Cart will not move unless pushed.
Kevin...
I don't have any idea how to help you but I can certainly appreciate the 'not move unless pushed' remark. Be patient... there will be one of the 'sparkies' along to provide help. I would help if you posted a little more info: 1. Is this a stock Yamaha or has it been upgraded? 2. The type of charging system in use 3. Is this a recent problem on a cart you've had or a 'new to you cart' that you have short history with JW |
02-24-2018, 05:50 PM | #3 |
Not Yet Wild
Join Date: Feb 2018
Posts: 2
|
Re: Cart will not move unless pushed.
This is a stock cart. I’ve had it 6 months and this probably just started.
Not sure as far as the charging system. It has the factory Yamaha charger. Thank you for the reply. |
04-16-2021, 01:40 PM | #4 |
Not Yet Wild
Join Date: Apr 2021
Posts: 5
|
Re: Cart will not move unless pushed.
By any chance did you figure this out mine is doing the same thing. I have been going crazy trying to figure it out.
|
04-16-2021, 01:43 PM | #5 |
Gone Wild
Join Date: Sep 2010
Location: Florida
Posts: 1,895
|
Re: Cart will not move unless pushed.
Your cart has bad motor brushes...hit the motor cap with a hammer...it will move fine for a moment afterwards which will confirm this...
|
04-16-2021, 03:44 PM | #6 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 12,997
|
Re: Cart will not move unless pushed.
What he said.. Just replaced mine last summer.
|
04-18-2021, 09:43 AM | #7 |
Not Yet Wild
Join Date: Apr 2021
Posts: 5
|
Re: Cart will not move unless pushed.
Thank you. I will try this out. I figured it might have had something to do with the tires I put on it. They are 27” tires and 12” rim.
|
04-18-2021, 10:14 PM | #8 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Cart will not move unless pushed.
27" tall tires? Might as well take the stock motor & motor controller off right now & toss em in the shed, they are both useless for 27" tall tires.
|
04-19-2021, 08:05 PM | #9 |
Not Yet Wild
Join Date: Apr 2021
Posts: 5
|
Re: Cart will not move unless pushed.
They are not stock I have a Curtis 500amp controller and a admiral Mot-A1 motor on there now.
|
04-22-2021, 06:00 PM | #10 |
Not Yet Wild
Join Date: Apr 2021
Posts: 5
|
Re: Cart will not move unless pushed.
Is it possible to put the new brushes in backwards? I “think” I put the new ones in the same way the old came out but when I put it in forward it goes backwards and Vice versa? The cables to the motor are correct I know that for sure.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
1991 Club Car 36VT moves slowly when put in F but doesnt move when the gas is pushed | Electric Club Car | |||
Cart jumping when throttle pedal pushed | Electric EZGO | |||
g2 turned over but does not move unless pushed | Gas Yamaha | |||
cart lights dieing when pedal pushed | Electric Club Car | |||
Motor runs when pedal is pushed but slow to move. | Gas EZGO |