g2 bent axel

hidfusion · 05-31-2009, 12:41 PM

i think the axel is bent on the drivers side and i just wanted someones second opinion. i swapped the rims and it didn't change the wobble of the wheel. so i took off the drum off and it was hard to take off on the drivers side and it was easy on the pass. seeing that it was harder to take off on the driver it made me think that it is def. bent.

capt jay baker · 05-31-2009, 06:27 PM

If you jack the rear up and remove the drums start the engine in gear and if there is a wobble the axle is bent.

hidfusion · 05-31-2009, 07:22 PM

thank for the help. the axel is def. bent. Just to be sure i never done this before but im guessing you have to remove the carrier and split it to remove the axel. Is there anything else i should order besides an axel and carrier gasket?

groundpounder · 05-31-2009, 07:30 PM

just unhook shock and take the 6 bolts out that the axle tube bolts to center section. and it will slide right out. oh and unhook break cable that's hooked to brake drum.

hidfusion · 06-01-2009, 07:35 PM

thanks for you help

05-31-2009, 12:41 PM	#1
hidfusion Not Yet Wild Join Date: May 2009 Posts: 18	g2 bent axel i think the axel is bent on the drivers side and i just wanted someones second opinion. i swapped the rims and it didn't change the wobble of the wheel. so i took off the drum off and it was hard to take off on the drivers side and it was easy on the pass. seeing that it was harder to take off on the driver it made me think that it is def. bent.
hidfusion Not Yet Wild Join Date: May 2009 Posts: 18

05-31-2009, 06:27 PM	#2
capt jay baker Not Yet Wild Join Date: Mar 2009 Location: San Antonio/Seadrift Texas Posts: 69	Re: g2 bent axel If you jack the rear up and remove the drums start the engine in gear and if there is a wobble the axle is bent.

05-31-2009, 07:22 PM	#3
hidfusion Not Yet Wild Join Date: May 2009 Posts: 18	Re: g2 bent axel thank for the help. the axel is def. bent. Just to be sure i never done this before but im guessing you have to remove the carrier and split it to remove the axel. Is there anything else i should order besides an axel and carrier gasket?
hidfusion Not Yet Wild Join Date: May 2009 Posts: 18

05-31-2009, 07:30 PM	#4
groundpounder Gone Wild Join Date: Sep 2007 Location: maine Posts: 3,352	Re: g2 bent axel just unhook shock and take the 6 bolts out that the axle tube bolts to center section. and it will slide right out. oh and unhook break cable that's hooked to brake drum.

06-01-2009, 07:35 PM	#5
hidfusion Not Yet Wild Join Date: May 2009 Posts: 18	Re: g2 bent axel thanks for you help
hidfusion Not Yet Wild Join Date: May 2009 Posts: 18

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Similar Threads
Thread	Forum
Bent Frame	Electric EZGO
Bent Axel? 97 G16	Gas Yamaha
Spark plug tab bent	Gas Club Car
whats the difference between an 1987 and a 1994 ezgo front axel set up!!!	Garage and Workshop
bent push rod	Big Block Talk!