light kit install problem

Sledgehammer · 03-24-2011, 08:41 PM

yes i have that installed and it appears to be correct. after it was installed is when i got the above mentioned readings with my test light. however still no working lights.

Sledgehammer · 03-24-2011, 08:42 PM

i am now doing what you mentioned above and looking to see if i can find a broken or loose wire in the harness. thank you

GLEEMO · 03-24-2011, 08:50 PM

is it a circuit breaker or fuse ?
is it blown , needs reset ?
so if U test on either side of this fuse do U have 12 Volts on both sides ?

Sledgehammer · 03-24-2011, 08:51 PM

yes i got the addendum harness installed, it appears to be correct. after i got it installed is when i got the above test light readings but the lights still don't work.
now i am doing what you sugested above and checking for broken or loose wires in the harness. thanks

Sledgehammer · 03-25-2011, 02:23 PM

it is a breaker. it plugs into the harness by the battery. took breaker off and put a jumper wire direct, just to see if the lights would work, they did not. there is no juice to either of the wires at the breaker. if i ground the test light to the battery neg. the test light glows, but still no headlights.

GLEEMO · 03-25-2011, 05:36 PM

is this a continuity tester ? touch both leads together , does it glow ?

Sledgehammer · 03-26-2011, 08:54 AM

i am using an ordinary test light.

GLEEMO · 03-26-2011, 11:53 AM

yeah I know.
But is it a test light for continuity or voltage.
Thats why I ask U to touch the two leads together on the test light and see if U get a light

Sledgehammer · 03-26-2011, 02:50 PM

sorry. it is for continuity.

GLEEMO · 03-26-2011, 04:11 PM

OK so as Old Mech recommends go to Lowe's , harbor Freight and get a DIGITAL
read out meter .
$10-$15 does not have to be the best just so we can run the voltage problem down ?

Email or call http://www.mymadjax.com/ and see if they have a troubleshooting proc. for this.

If not we'll figure it out

Have a good WE . PS the first place to check for the 12 Volts is at the CC
plug. If U don't have it there it can't get to the lights .

03-24-2011, 08:41 PM	#11
Sledgehammer Not Yet Wild Join Date: Mar 2011 Posts: 16	Re: light kit install problem yes i have that installed and it appears to be correct. after it was installed is when i got the above mentioned readings with my test light. however still no working lights.
Sledgehammer Not Yet Wild Join Date: Mar 2011 Posts: 16

03-24-2011, 08:42 PM	#12
Sledgehammer Not Yet Wild Join Date: Mar 2011 Posts: 16	Re: light kit install problem i am now doing what you mentioned above and looking to see if i can find a broken or loose wire in the harness. thank you
Sledgehammer Not Yet Wild Join Date: Mar 2011 Posts: 16

03-24-2011, 08:50 PM	#13
GLEEMO just leave me alone Join Date: Aug 2008 Location: Tennessee Posts: 5,643	Re: light kit install problem is it a circuit breaker or fuse ? is it blown , needs reset ? so if U test on either side of this fuse do U have 12 Volts on both sides ?

03-24-2011, 08:51 PM	#14
Sledgehammer Not Yet Wild Join Date: Mar 2011 Posts: 16	Re: light kit install problem yes i got the addendum harness installed, it appears to be correct. after i got it installed is when i got the above test light readings but the lights still don't work. now i am doing what you sugested above and checking for broken or loose wires in the harness. thanks
Sledgehammer Not Yet Wild Join Date: Mar 2011 Posts: 16

03-25-2011, 02:23 PM	#15
Sledgehammer Not Yet Wild Join Date: Mar 2011 Posts: 16	Re: light kit install problem it is a breaker. it plugs into the harness by the battery. took breaker off and put a jumper wire direct, just to see if the lights would work, they did not. there is no juice to either of the wires at the breaker. if i ground the test light to the battery neg. the test light glows, but still no headlights.
Sledgehammer Not Yet Wild Join Date: Mar 2011 Posts: 16

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

03-25-2011, 05:36 PM	#16
GLEEMO just leave me alone Join Date: Aug 2008 Location: Tennessee Posts: 5,643	Re: light kit install problem is this a continuity tester ? touch both leads together , does it glow ?

03-26-2011, 08:54 AM	#17
Sledgehammer Not Yet Wild Join Date: Mar 2011 Posts: 16	Re: light kit install problem i am using an ordinary test light.
Sledgehammer Not Yet Wild Join Date: Mar 2011 Posts: 16

03-26-2011, 11:53 AM	#18
GLEEMO just leave me alone Join Date: Aug 2008 Location: Tennessee Posts: 5,643	Re: light kit install problem yeah I know. But is it a test light for continuity or voltage. Thats why I ask U to touch the two leads together on the test light and see if U get a light

03-26-2011, 02:50 PM	#19
Sledgehammer Not Yet Wild Join Date: Mar 2011 Posts: 16	Re: light kit install problem sorry. it is for continuity.
Sledgehammer Not Yet Wild Join Date: Mar 2011 Posts: 16

03-26-2011, 04:11 PM	#20
GLEEMO just leave me alone Join Date: Aug 2008 Location: Tennessee Posts: 5,643	Re: light kit install problem OK so as Old Mech recommends go to Lowe's , harbor Freight and get a DIGITAL read out meter . $10-$15 does not have to be the best just so we can run the voltage problem down ? Email or call http://www.mymadjax.com/ and see if they have a troubleshooting proc. for this. If not we'll figure it out Have a good WE . PS the first place to check for the 12 Volts is at the CC plug. If U don't have it there it can't get to the lights .

Similar Threads
Thread	Forum
Precedent light kit - hard install?	Electric Club Car
Light kit install	Gas Yamaha
want to install a light kit	Electric Club Car
Brake light install	Electric Yamaha
Gas Club Car Light Install	Gas Club Car