|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-29-2016, 06:57 PM | #1 |
Not Yet Wild
Join Date: Sep 2016
Posts: 1
|
Motor Speed Problem
Hey guys I put a curtis 1205m controller in a marathon. I have a diagnostic tool connected to the cart. The issue im having is whenever the motor speed goes to 50 percent the motor will shut off. If i set the cart to have a max speed at 49 percent it will run just fine.. so im assuming it has something to do with the motor going above half power? any ideas?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
Tags |
motor, power, speed, stall |
|
|
Similar Threads | ||||
Thread | Forum | |||
Loud noise and clicking at full speed on new high speed motor. | Electric EZGO | |||
08 precedent electric speed sensor problem. Cart starts at proper speed then slows . | Electric Club Car | |||
Speed Sensor? Weird problem after motor install | Electric Club Car | |||
Half speed, speed sensor problem?. | Electric Club Car | |||
High Speed Motor Temp problem? | Electric EZGO |