|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-26-2017, 04:21 PM | #1 |
Not Yet Wild
Join Date: Apr 2017
Posts: 2
|
Looking for the correct tie rod end 1995 Medalist
I've got a lifted 1995 Medalist (it has a 1997 TXT body which I don't believe makes a difference) and the tie rod ends are looking extremely rough and have quite a bit of slop in them. Before I go and order parts not being exactly sure they are the right ones, I would appreciate if someone could point me in the right direction or give some part numbers. I've attached pictures if that helps.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-27-2017, 07:09 AM | #2 |
Gone Wild
Join Date: Jun 2015
Location: St. Augustine, FL
Posts: 328
|
Looking for the correct tie rod end 1995 Medalist
27205G01 and 27205G02. Left and right thread, one of each. However, it is about $20 cheaper to buy a new tie rod assembly, (70074G01/70074G02) with both ends and a new rod, than to buy two ends. Each side requires one left and one right hand thread.
http://golfcartking.shopgate.com/item/36343837 Sent from my iPhone using Tapatalk |
04-27-2017, 01:44 PM | #3 |
Not Yet Wild
Join Date: Apr 2017
Posts: 2
|
Re: Looking for the correct tie rod end 1995 Medalist
Thanks!
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
EZ go wiring help 36v 1995 medalist | Electric EZGO | |||
1995 E-Z-GO Medalist | Electric EZGO | |||
My 1995 Medalist DCS | Electric EZGO | |||
1995 DCS medalist won't go | Electric EZGO | |||
1995 medalist bagwell | Electric EZGO |