|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-01-2017, 10:28 PM | #1 |
Not Yet Wild
Join Date: May 2015
Posts: 13
|
installed new F&R switch on EZGO TXT now won't move
I have a 2003 EZGO TXT with a series motor. A few days ago, I noticed that it was acting up. It had power but would barely move and smelled hot. After it started moving it was fine. So i go in and find a cable burned on the F&R switch. Two posts were damaged, so I ordered a new F&R complete unit and must have gotten a wire mixed up somewhere when installing it because now I have no power at all.
I tried continuity testing per another post and it shows continuity between any pair (every possible pair) of posts on the F&R switch. Frustrated... |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-01-2017, 11:41 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: installed new F&R switch on EZGO TXT now won't move
compare to this instruction.
|
09-02-2017, 07:16 AM | #3 |
Gone Wild
Join Date: Apr 2013
Location: Deep Run, NC
Posts: 2,544
|
Re: installed new F&R switch on EZGO TXT now won't move
Does the solenoid click when you try to go?
Sent from my SM-G930R4 using Tapatalk |
09-02-2017, 09:56 AM | #4 |
Not Yet Wild
Join Date: May 2015
Posts: 13
|
Re: installed new F&R switch on EZGO TXT now won't move
My problem is that i have continuity across every post (i.e. 4-3, 4-8, and 4-5, etc..)
Also, I didn't open the controller box, but I have a-2 in position #4 (I just checked controller and I have a-1 at position m- ... It was running fine until it got hot and i swapped out the f&r switch assembly |
09-02-2017, 10:10 AM | #5 |
Not Yet Wild
Join Date: May 2015
Posts: 13
|
Re: installed new F&R switch on EZGO TXT now won't move
no sounds at all
|
09-02-2017, 10:16 AM | #6 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: installed new F&R switch on EZGO TXT now won't move
If the solenoid is not clicking when you try to go the F&R micro switches or the switches supply may be at fault.
Check to see if you have 36v (+) at the micro switch on the driver's side... at one terminal in neutral and at both terminals in either travel direction. |
09-02-2017, 10:18 AM | #7 |
Not Yet Wild
Join Date: May 2015
Posts: 13
|
Re: installed new F&R switch on EZGO TXT now won't move
ScottyB
Is this view from the front or the rear? From the "B" nut designation it looks like a view from the rear. If so my s-2 and s-1 are reversed. Here is what i have using a "clock" setup from the rear looking towards the front of the cart: 12 = A-2 3 = S-1 6 = Controller B+ 9 = S-2 micro switches from left to right: blue, red, jumper, orange/red |
09-02-2017, 10:27 AM | #8 | |
Not Yet Wild
Join Date: May 2015
Posts: 13
|
Re: installed new F&R switch on EZGO TXT now won't move
Quote:
Additionally = brand new f&r switch - have done continuity tests with microswitches - they seem to be working also have done continuity with all cables disconnected - switch seems to be working properly |
|
09-02-2017, 10:42 AM | #9 | |
Not Yet Wild
Join Date: May 2015
Posts: 13
|
Re: installed new F&R switch on EZGO TXT now won't move
Quote:
|
|
09-02-2017, 11:13 AM | #10 |
Not Yet Wild
Join Date: Nov 2014
Location: northern michigan
Posts: 34
|
Re: installed new F&R switch on EZGO TXT now won't move
mu cart is a couple years older but the micro switch terminal closest to the battery has a red wire connected to pack voltage+ the next terminal has a blue wire and a red wire that goes to the next switch then finally the orange, hope this helps, dehartb
|
Tags |
ezgo, f&r, forward, reverse, txt |
|
|
Similar Threads | ||||
Thread | Forum | |||
Installed New F&R Switch 2006 TXT | Electric EZGO | |||
2008 RXV - installed stereo and now the cart wont move | Electric EZGO | |||
EZGO solenoid clicks and won't move is it F/R switch? | Electric EZGO | |||
Installed lift on my club cart and now it won't move | Electric Club Car | |||
Installed light kit Now it won't move! | Electric Club Car |