|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-23-2009, 09:56 AM | #1 |
REAL MEN GET EM DIRTY
Join Date: Jun 2009
Location: rincon , ga.
Posts: 3,646
|
Low End Torque Gear For 1985 Ezgo
I Have A '85 Electric Ez Go. I Am Building My Own 9" Lift For It To Clear 27's. I Am Wanting To Know If Anyone Knows Of A Low End Torque Gear Set For The 85's.
Thank You For Any Help |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-23-2009, 12:07 PM | #2 |
Gone Wild
Join Date: Mar 2009
Location: Roseville, CA
Posts: 2,757
|
Re: Low End Torque Gear For 1985 Ezgo
Welcome to BGW!
I always recommend our sponsors but did a few searches through their sites and found nothing. The axle ratio that you likely have is 12.44:1 and to make this into a rock crawler you need a higher ratio. The one I found was 15:1 at http://www.golfcarcatalog.com/catalo...d=1424&id=4286 If any of the sponsors have something like this, now's the time to pipe in. |
06-23-2009, 12:48 PM | #3 |
REAL MEN GET EM DIRTY
Join Date: Jun 2009
Location: rincon , ga.
Posts: 3,646
|
Re: Low End Torque Gear For 1985 Ezgo
I Have Seen These Before And I Like The Breakdown They Have, What Im Not Sure About Is Will These Gears Work In My Cart. Its Showing Those Gears Are For '88 And Up. My Cart Is A '85
Thanks For The Reply |
06-23-2009, 01:18 PM | #4 |
Gone Wild
Join Date: Mar 2009
Location: Roseville, CA
Posts: 2,757
|
Re: Low End Torque Gear For 1985 Ezgo
Perhaps you could call or email the supplier and find out if the differentials are the same.
|
06-23-2009, 01:40 PM | #5 |
REAL MEN GET EM DIRTY
Join Date: Jun 2009
Location: rincon , ga.
Posts: 3,646
|
Re: Low End Torque Gear For 1985 Ezgo
Ill Do That. I Can Find Everything Else Under The Sun For The Thing But Gears. I Also Need To Find A Wiring Diagram For The Cart. Any Idea Where I Can Find It.
|
06-23-2009, 01:58 PM | #6 |
steeplejack x
Join Date: Jan 2007
Location: Republic of Texas
Posts: 3,382
|
Re: Low End Torque Gear For 1985 Ezgo
Is traction motor perpendicular or parallel to the axle?
|
06-23-2009, 02:00 PM | #7 |
REAL MEN GET EM DIRTY
Join Date: Jun 2009
Location: rincon , ga.
Posts: 3,646
|
Re: Low End Torque Gear For 1985 Ezgo
perpendicular
|
06-23-2009, 02:02 PM | #8 | |
Gone Wild
Join Date: Mar 2009
Location: Roseville, CA
Posts: 2,757
|
Re: Low End Torque Gear For 1985 Ezgo
Quote:
Click here: http://www.buggiesgonewild.com/elect...g-manuals.html |
|
06-23-2009, 02:06 PM | #9 |
steeplejack x
Join Date: Jan 2007
Location: Republic of Texas
Posts: 3,382
|
Re: Low End Torque Gear For 1985 Ezgo
|
06-23-2009, 02:23 PM | #10 |
REAL MEN GET EM DIRTY
Join Date: Jun 2009
Location: rincon , ga.
Posts: 3,646
|
Re: Low End Torque Gear For 1985 Ezgo
That's What I Figured About Gears. I Have Three Motors For This Cart. So When I Burn Them All Up. Ill Replace It With A Newer Cart. I Also Have Another '85 That Im Putting A Atv Motor And Rear In. Its Gona Be My Go Fast Cart Lol.
I Thank You Very Much For The Wiring Diagram. |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Adjustment Of Governor/Linkage to help with lower gear/torque? | Gas EZGO | |||
where can find parts for a 1985 ezgo gas motor | Gas EZGO | |||
1985 ezgo manual | Gas EZGO | |||
1985 EZGO microswitch bad? | Gas EZGO | |||
1985 EZGO 2 stroke. | Golf Carts and Parts |