|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
02-25-2017, 01:17 PM | #1 |
Getting Wild
Join Date: Feb 2017
Location: Texarkana, Tx
Posts: 87
|
Wiring reducer setup
Hello all, getting ready to wire my reducer to run my lights and radio.
I'm going to follow this diagram for wiring my reducer. Red to pos battery terminal, first b- to neg battery terminal now would the yellow wire go to the pos terminal of fuse block and the other b- to neg terminal of fuse block? If this is the case where can I put in a switch to manually turn it off or wire it so when key is off reducer is off without having to run a wire to key switch in dash. Thanks all! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-25-2017, 01:58 PM | #2 |
Guest
Posts: n/a
|
Re: Wiring reducer setup
|
02-25-2017, 02:03 PM | #3 |
Getting Wild
Join Date: Feb 2017
Location: Texarkana, Tx
Posts: 87
|
Re: Wiring reducer setup
What a detailed explanation! Thanks CTD
Sent from my iPhone using Tapatalk |
02-25-2017, 02:05 PM | #4 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: Wiring reducer setup
Can't get know easier than that CTD
|
02-25-2017, 02:05 PM | #5 |
Guest
Posts: n/a
|
Re: Wiring reducer setup
|
02-25-2017, 02:19 PM | #6 |
Getting Wild
Join Date: Feb 2017
Location: Texarkana, Tx
Posts: 87
|
Re: Wiring reducer setup
02 ezgo pds 36v brand new battery pack with dpi charger.
Only other question is with my voltmeter how do I test key switch to figure out which one is hot when key is on? Sent from my iPhone using Tapatalk |
02-25-2017, 02:29 PM | #7 |
Guest
Posts: n/a
|
Re: Wiring reducer setup
put black probe (neg) on pack neg and red probe to key switch note both wires are yellow/white
|
02-25-2017, 02:35 PM | #8 |
Guest
Posts: n/a
|
Re: Wiring reducer setup
if you are not wanting to run wire to key switch... splice into the yellow/white wire that is in the J1 plug ~ #9 pin
|
02-25-2017, 03:21 PM | #9 |
Getting Wild
Join Date: Feb 2017
Location: Texarkana, Tx
Posts: 87
|
Re: Wiring reducer setup
Ok I will probably splice into the j1 plug #9 pin so I don't have to run it to key switch.
Thanks again CTD you've been a huge help Sent from my iPhone using Tapatalk |
02-25-2017, 03:42 PM | #10 |
Guest
Posts: n/a
|
Re: Wiring reducer setup
make sure you put it in tow mode |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Voltage reducer, lights, stereo setup.... | Electric Club Car | |||
Reducer wiring help | Electric EZGO | |||
Wiring schematic for 5 solenoid setup | Electric EZGO | |||
Club car clone wiring setup | Clone Engine Swaps | |||
wiring an 77 engine to 87 setup | Gas EZGO |