any ideas?

baydoe · 01-09-2020, 10:11 AM

Ok, So i just installed the alltrax 400, new solenoid, and 2 gauge battery cables into my 2015 precedent.... everything is working well except when i plugged my car in to charge. It wouldn't do the 3 beeps that it has always done??? it was charged this morning but just confused as to why that would stop. any ideas?

Thanks!

Fairtax4me · 01-09-2020, 02:27 PM

The 3 beeps, and the operation of the battery lamp on the dash are functions of the stock Curtis controller, which you removed.

The Alltrax doesn't do the 3 beeps, and it is not connected with the battery lamp on the dash. Mostly because those are non-necessary functions.
Install a digital volt meter (with numbers, Not the bar graph) so you know when your batteries are getting low based on voltage.

scottyb · 01-09-2020, 02:46 PM

Amen to that !

baydoe · 01-09-2020, 02:51 PM

Quote:

Originally Posted by Fairtax4me

The 3 beeps, and the operation of the battery lamp on the dash are functions of the stock Curtis controller, which you removed.

The Alltrax doesn't do the 3 beeps, and it is not connected with the battery lamp on the dash. Mostly because those are non-necessary functions.
Install a digital volt meter (with numbers, Not the bar graph) so you know when your batteries are getting low based on voltage.

Thanks!!! i was hoping that was the case and i didn't install something wrong! appreciate it!

rib33024 · 01-09-2020, 03:49 PM

With the new 2ga cables. How did you run the cable through the OBC

baydoe · 01-09-2020, 04:06 PM

Quote:

Originally Posted by rib33024

With the new 2ga cables. How did you run the cable through the OBC

2015 precedent does not have an OBC. it has the E.R.I.C charger.

01-09-2020, 10:11 AM	#1
baydoe Not Yet Wild Join Date: May 2019 Location: North Dakota Posts: 24	any ideas? Ok, So i just installed the alltrax 400, new solenoid, and 2 gauge battery cables into my 2015 precedent.... everything is working well except when i plugged my car in to charge. It wouldn't do the 3 beeps that it has always done??? it was charged this morning but just confused as to why that would stop. any ideas? Thanks!

01-09-2020, 02:27 PM	#2
Fairtax4me Bonafide Nincompoop Join Date: Dec 2015 Location: Charlottesburg Va Posts: 8,987	Re: any ideas? The 3 beeps, and the operation of the battery lamp on the dash are functions of the stock Curtis controller, which you removed. The Alltrax doesn't do the 3 beeps, and it is not connected with the battery lamp on the dash. Mostly because those are non-necessary functions. Install a digital volt meter (with numbers, Not the bar graph) so you know when your batteries are getting low based on voltage.

01-09-2020, 02:46 PM	#3
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,408	Re: any ideas? Amen to that !

01-09-2020, 03:49 PM	#5
rib33024 ...................... Join Date: Apr 2009 Location: FT Lauderdale FL. Posts: 16,416	Re: any ideas? With the new 2ga cables. How did you run the cable through the OBC

Similar Threads
Thread	Forum
looking for ideas	Gas Club Car
Any ideas????	Gas Yamaha
any ideas	Gas Yamaha

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum