|
|
|||||||
| Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
07-09-2009, 09:55 AM
|
#1 |
|
Not Yet Wild
Join Date: Jul 2009
Location: Saline, MI
Posts: 12
|
Anyone remove Idler shaft from 92 Marathon
Need to remove the steering Idler shaft from a 92 Marathon. Has anyone done this?? Looks like it needs to go out of the top, so does the body have to come off?? Thanks in advance.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-10-2009, 05:09 AM
|
#2 |
|
Not Yet Wild
Join Date: Jul 2009
Location: Saline, MI
Posts: 12
|
Re: Anyone remove Idler shaft from 92 Marathon
Removed it last night. Removed cotter pin on bottom and shaft slid out with no problem.
|
|
|
|
|
06-24-2011, 09:54 AM
|
#3 |
|
Not Yet Wild
Join Date: Jun 2011
Location: Carey, OH
Posts: 33
|
Re: Anyone remove Idler shaft from 92 Marathon
Does the shaft slide out leaving the bushing behind? Did you replace the bushing? I take it that there "should" be some play in the bottom then, if the shaft slides out from the bottom?
I've been struggling with how to correct the excessive play in the idler but the play is at the bottom of the shaft. Doesn't appear (via schematic) that there is a flange at the bottom to keep things tight....your suggestion / thoughts? Thanks, Jed |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| idler arm | Gas EZGO | |||
| Remove Gov on Marathon | Big Block Talk! | |||
| remove governor | Gas EZGO | |||
| How to remove the | Electric EZGO | |||
| How to remove body from G9 | Gas Yamaha | |||
Linear Mode
