g1 yamaha

[dogskin]

I have a g1 yamaha and last year it died on me to where i had to charge it every time to start it. WEll this year i bought new brushes for the starter/gen and put it in today and it just clicks the starter/gen doesnt spin the battery is charged and it still wont spin idk y can anyone help i checked alll the wires to and the ground and still nothing

[stevensj13]

Try to turn the starter by hand and see if it is stuck.

[dogskin]

it is not stuck

[chuddly]

those are pretty simple...its either key switch, solinoid, starter/gen,fuse or wireing

Take your pick on where to start but i would say its either a wire or fuse since it worked before

[dogskin]

i ckecked the fuses and wires there good and what do u mean by the key switch

[chuddly]

the key is a switch on these carts...if its not working then it wont send the signal saying to want to go forward or backward

[victorjohn]

There is a fuse behind/beside the solenoids. Check if there is connection, i.e. fuse intact/not blown. If you have a multitester, check for continuity.

If you turn the switch counterclockwise, do you hear the back-up horn beeping? If no, then you could have a blown fuse at the location I mentioned in the paragraph above.

[sho305]

I would test the voltage out of the solenoid see if the gen is getting 12v, then test ground.

[dogskin]

last year it seem to start up fine for a while then i rode it on a trail and a stick came up under nethand there atre three wires conected to a big white wire that goes to the battery those came unplugged and i might have mixed the order could this be the reason

[DOOmsman]

Originally Posted by dogskin

last year it seem to start up fine for a while then i rode it on a trail and a stick came up under nethand there atre three wires conected to a big white wire that goes to the battery those came unplugged and i might have mixed the order could this be the reason

Yes
Lets start at the click, what clicks, a micro switch or the solenoid?