|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
10-03-2012, 10:36 PM | #1 |
Not Yet Wild
Join Date: Apr 2012
Posts: 62
|
97 g16 body removal
I have a 97 g16 and want to remove the front and rear body so I can paint it, does anyone have step by step procedure to do this thank you
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-04-2012, 07:32 AM | #2 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: 97 g16 body removal
Do a search, its in here.
|
10-04-2012, 08:56 AM | #3 |
Gone Wild
Join Date: Apr 2012
Location: Southern Maryland
Posts: 222
|
Re: 97 g16 body removal
It's cake. Just remove all of the screws/nuts/bolts that you see holding the plastic down, and remove the four 12mm bolts that hold the backrest in for the seat. That's about it.
|
10-04-2012, 08:58 AM | #4 |
Not Yet Wild
Join Date: Apr 2012
Posts: 62
|
Re: 97 g16 body removal
Ok thanks I am going to do it this weekend
|
10-04-2012, 09:11 AM | #5 |
LIFE IS TAKING FOREVER
Join Date: Apr 2010
Location: DANSVILLE NY
Posts: 5,327
|
Re: 97 g16 body removal
There will be two screws under the YAMAHA emblem on the front. There will also be bolts on each side just in front of the rear tires holding the back half also.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
G9 body removal for painting | Gas Yamaha | |||
G16 Body Removal | Gas Yamaha | |||
Body removal | Gas Club Car | |||
Help with body removal | Gas Yamaha | |||
EZ GO body removal help | Gas EZGO |