CC precedent controller faults

[bigred]

I have a 2012 CC Precedent and am having problems clearing a fault in the controller.
High Speed BreakAway fault.
Programmer shows no current faults
History shows the breakaway fault but when I go to Clear History it tells me History deleted but when I go back into history there it is never cleared. If there are any other faults in history it will clear them but not the breakaway fault.
I'm playing with a 2012 CC Precedent
Curtis Controller 1515-5201
Curtis Hand Held 1311-4404 programmer
Motor has been turned and has the upgraded magnet.

Any help here would be greatly appreciated.

[robertsmossyoak]

I may have the same problem.What are your symptoms ? I think my new 1515-5201 just went into limp mode from 16.5 MPH to 8 MPH.

[bigred]

Originally Posted by robertsmossyoak

I may have the same problem.What are your symptoms ? I think my new 1515-5201 just went into limp mode from 16.5 MPH to 8 MPH.

Sounds like speed sensor. Bad speed sensor will put you in limp mode. Replace it. Check the magnet while you have the sensor off. Have at it. Hope this helps.

[mrgolf]

One day just for kicks I let my cart go down a hill in roll away braking. It did a great job holding the cart from going fast. After I hit my golf shot my cart went into limp mode. I thought I had really messed up. I put the cart in tow and checked all my cables, looking for what could have came loose. When I put it back in run everything worked fine. That was one of those oops. Don't do that again.