lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 06-24-2008, 08:42 PM   #1
roadking
Not Yet Wild
Club Car
 
Join Date: Jun 2008
Location: South Carolina
Posts: 4
Question cable and controller questions

Hello, I am new to the golf cart world and have a few questions. I bought a 2002 club car 48v series, so far i have ordered a motor from plum quick and am in the process of changing the battery cables with 1/0 welding lead (free). 1 cable runs through what i understand to be an electronic charging control, the 1/0 cable will not fit the stock hole, do drill the hole larger or leave the stock cable in place and run the new cable around the electronic control? Next question, I want to buy a logisystems controller ( price) , does a club car use the 0 - 5k or the 5k - 0? Thanks in advance.
roadking is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 06-24-2008, 09:03 PM   #2
rusty
Golf Cart Photographer
 
rusty's Avatar
Club Car
 
Join Date: Jan 2007
Location: Wichita Falls Texas - My Ride 2010 Club Car
Posts: 6,236
Default Re: cable and controller questions

Welcome to the forum roadking......................

Someone will be here to answer your questions.
rusty is offline   Reply With Quote
Old 06-24-2008, 09:09 PM   #3
roady89
nimda
Club Car
 
Join Date: Jun 2007
Posts: 13,023
Default Re: cable and controller questions

You can drill the hole bigger but I think you may leave well enough alone. A Club Car uses a 5k-0 ohm type throttle.



Edit* Very sleeepy whe I posted this sorry.
roady89 is offline   Reply With Quote
Old 06-25-2008, 12:08 AM   #4
phasetim
Just me. .
 
phasetim's Avatar
Club Car
 
Join Date: Sep 2007
Location: Pensacola, FL
Posts: 1,092
Default Re: cable and controller questions

Leave stock cable alone, run second cable around. Everything will perform as it should this way, and you don't have to drill anything.
phasetim is offline   Reply With Quote
Old 06-25-2008, 05:39 AM   #5
roadking
Not Yet Wild
Club Car
 
Join Date: Jun 2008
Location: South Carolina
Posts: 4
Default Re: cable and controller questions

Thank you, I appreciate the quick response.
roadking is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Controller Questions along with every other question about carts Electric EZGO
4 Gauge Cable Kit Electric EZGO
Cable hanging loose. Gas Club Car
choke cable Gas Yamaha


All times are GMT -5. The time now is 03:08 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.