|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
12-15-2016, 02:08 PM | #11 |
Gone Wild
Join Date: May 2016
Posts: 242
|
Re: Turn signals backwards
sorry I did not notice your reply and the questions tell now. Did you get it figured out?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-15-2016, 02:15 PM | #12 |
Not Yet Wild
Join Date: Dec 2016
Posts: 10
|
Re: Turn signals backwards
I ended up running the harness down the passenger side to flip the harness so they operate right. Except I Frickin blew the bulbs because I jumped the wires across the batteries. So I have to find new 889 bulbs somewhere.
The only issue now is that the brake light switch doesn't reach the pedal. Frustrations! |
12-15-2016, 05:04 PM | #13 |
Gone Wild
Join Date: May 2016
Posts: 242
|
Re: Turn signals backwards
I ran the wires down the driver side toward the rear then ran the shorter wires ( which was supposed to be the drivers side) over and across the shortest rout up over the motor to the passenger side then the longer set of wires to the drivers side.
|
12-15-2016, 05:11 PM | #14 |
Gone Wild
Join Date: May 2016
Posts: 242
|
Re: Turn signals backwards
Also sorry that you blew the bulbs. That's probably the first time any of us have ever heard of that happening or have ever done that our self's, Im guessing. HAHA!
|
12-15-2016, 05:17 PM | #15 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: Turn signals backwards
When I'm working under the seat of the cart. I put a rubber floor mat over the batteries, so I don't drop anything on the battery connections and short something out.
|
12-15-2016, 05:27 PM | #16 |
Gone Wild
Join Date: May 2016
Posts: 242
|
Re: Turn signals backwards
Great tip .
|
12-15-2016, 06:20 PM | #17 |
Not Yet Wild
Join Date: Dec 2016
Posts: 10
|
Re: Turn signals backwards
Yeah total rookie move! Joel how did you reach the brake light switch over to the pedal?
|
12-15-2016, 08:26 PM | #18 |
Gone Wild
Join Date: May 2016
Posts: 242
|
Re: Turn signals backwards
I do not recall the break switch being an issue, but then again I ran the wiring down the driver side.
|
12-15-2016, 09:00 PM | #19 |
Not Yet Wild
Join Date: Dec 2016
Posts: 10
|
Re: Turn signals backwards
Man I don't think there's anyway I could have reached the wires if I ran it that way. Which I had initially but there's no way I could have reached it to the passenger side. Then again I was freezing my *** off in my garage trying to rush it. Ha.
|
12-15-2016, 09:11 PM | #20 |
Gone Wild
Join Date: May 2016
Posts: 242
|
Re: Turn signals backwards
It was a pain and it barely reached but I was able to accomplish it without it being banjo tight by any means.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Turn Signals on RXV | Electric EZGO | |||
rxv turn signals | Electric EZGO | |||
Turn signals | Gas Yamaha | |||
Turn signals | Electric EZGO | |||
Turn signals...again | Electric EZGO |