|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-01-2017, 03:08 PM | #1 |
Getting Wild
Join Date: Apr 2010
Location: Aiken South Carolina
Posts: 105
|
Xct controller
I just installed my new xct 500 amp controller that I got from scotty. I get a single green light as it powers up . When I depress the pedal im getting at least 6 red blinking with no power to the motor, cart will not move.
Thanks for any help as im lost on where to start. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-01-2017, 05:22 PM | #2 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Xct controller
The LED ought to blink green four time on power up (if it is programmed for a EZGO ITS throttle) and then go to steady green.
The error codes consist of a number of of green blinks followed by a number or red blinks, then a short pause and the green red sequence repeats. (Blink code list attached) What is it installed in (DCS, PDS, TXT-48 or some other EZGO SepEx drive)? |
04-01-2017, 05:31 PM | #3 |
Getting Wild
Join Date: Apr 2010
Location: Aiken South Carolina
Posts: 105
|
Re: Xct controller
Johnnie it does blink 4 times green then stops and stays green. But when I depress the pedal im getting constant red blinking as long as I hold the pedal down. This is a brand new controller and b2 motor I just ordered from scotty and I have wired it twice and still no motor run. Im lost
|
04-01-2017, 06:11 PM | #4 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Xct controller
Continuous blinking red is a new one on me, sounds like it is time to contact Scotty.
|
04-01-2017, 07:54 PM | #5 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Xct controller
Continuous red blinking with pedal is a new one on me too. POst lots of pics of your install. Maybe we can see something?
|
|
|
Similar Threads | ||||
Thread | Forum | |||
WTS/WTT 400amp SepEx Controller for Series Controller | Golf Carts and Parts | |||
RXV controller not responding to upgrade handheld device to program controller | Electric EZGO | |||
Plum Quick Bandit + 500 AMP Controller OR Executioner w/ Stock Controller | Electric Club Car | |||
Trade 400 amp 36v Curtis controller for 500 amp or higher 48v controller | Golf Carts and Parts | |||
Did lift kit cause controller to die? What are controller options? 95 EZGO 25864G05 | Electric EZGO |