Fix broken instrument panel on ezgo

HAPPYVALLEY · 04-11-2017, 11:19 PM

Can anyone point me to the best way to correct a cracked and broken instrument panel for an ezgo?

I do not have the piece that is missing. I do have some fender pieces That I could potentially use as I have to replace the fenders.

The part is 71151-G01.

Thanks for any assistance.

Picture attached.IMG_1125.JPG

Sent from my iPhone using Tapatalk

twcoley · 04-12-2017, 08:35 PM

you can always make a template and trace it onto another piece of plastic and then plastic weld it in and sand fill with some filler and then repainted with some gloss or satin black paint.

HAPPYVALLEY · 04-26-2017, 09:54 PM

I used JB weld to take some broken fender pieces and filled in most of the gap. I then used bondo over it to form it and fill cracks.

Thanks TWCOLEY!!! This seems to be far better than I expected. I hope it holds up!

IMG_1159.JPG

Sent from my iPhone using Tapatalk

Rickochet · 04-27-2017, 08:28 AM

Quote:

Originally Posted by HAPPYVALLEY

I used JB weld to take some broken fender pieces and filled in most of the gap. I then used bondo over it to form it and fill cracks. Thanks TWCOLEY!!! This seems to be far better than I expected. I hope it holds up!

Nice job. If that doesn't hold up check with a cart company that does upgrades. They might have an old one laying around. Also there are upgrades like this one that might cover up what you have.

http://www.everythingcarts.com/p-106...1994-2013.aspx

DaveTM · 04-28-2017, 01:27 PM

Wow!!! You did some fine work there. I can only hope it holds up for you. And I mean that sincerely. From the pic, I can't tell it from factory. Again....nice work!!

mutant · 04-28-2017, 01:56 PM

very nice!!!!

04-11-2017, 11:19 PM	#1
HAPPYVALLEY Not Yet Wild Join Date: May 2009 Posts: 14	Fix broken instrument panel on ezgo Can anyone point me to the best way to correct a cracked and broken instrument panel for an ezgo? I do not have the piece that is missing. I do have some fender pieces That I could potentially use as I have to replace the fenders. The part is 71151-G01. Thanks for any assistance. Picture attached.IMG_1125.JPG Sent from my iPhone using Tapatalk
HAPPYVALLEY Not Yet Wild Join Date: May 2009 Posts: 14

04-12-2017, 08:35 PM	#2
twcoley Not Yet Wild Join Date: Mar 2017 Posts: 9	Re: Fix broken instrument panel on ezgo you can always make a template and trace it onto another piece of plastic and then plastic weld it in and sand fill with some filler and then repainted with some gloss or satin black paint.
twcoley Not Yet Wild Join Date: Mar 2017 Posts: 9

04-26-2017, 09:54 PM	#3
HAPPYVALLEY Not Yet Wild Join Date: May 2009 Posts: 14	Fix broken instrument panel on ezgo I used JB weld to take some broken fender pieces and filled in most of the gap. I then used bondo over it to form it and fill cracks. Thanks TWCOLEY!!! This seems to be far better than I expected. I hope it holds up! IMG_1159.JPG Sent from my iPhone using Tapatalk
HAPPYVALLEY Not Yet Wild Join Date: May 2009 Posts: 14

04-28-2017, 01:27 PM	#5
DaveTM Gone Wild Join Date: Oct 2012 Location: Southwestern Pa. Posts: 6,215	Re: Fix broken instrument panel on ezgo Wow!!! You did some fine work there. I can only hope it holds up for you. And I mean that sincerely. From the pic, I can't tell it from factory. Again....nice work!!

04-28-2017, 01:56 PM	#6
mutant Gone Wild Join Date: Aug 2014 Location: fletcher,nc Posts: 601	Re: Fix broken instrument panel on ezgo very nice!!!!

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Similar Threads
Thread	Forum
Ezgo access panel	Electric EZGO
Yamaha G1 instrument panel Needed	Golf Carts and Parts
instrument for good charged batteries	Electric Club Car
Wanted Used Instrument Panel/ Dash Ezgo 94 And Up	Golf Carts and Parts