|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-19-2017, 06:26 AM | #11 |
Master of All Things
Join Date: May 2013
Location: West Columbia, Texas
Posts: 18,001
|
Re: 36v EZGO just clicks when pedal is pushed
Time to take the pan off the rear end and see what you got.....check the condition of the oil and look to see if it looks "SPARKLY" (metal flakes in it) or of you have any CHUNKS in the pan.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-19-2017, 07:21 AM | #12 |
Not Yet Wild
Join Date: Apr 2017
Posts: 58
|
Re: 36v EZGO just clicks when pedal is pushed
|
04-19-2017, 08:54 AM | #13 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 36v EZGO just clicks when pedal is pushed
Quote:
The clearance for a PDS drive is 7/32 rather than 17/64 the Series drive uses. Attached are the ITS stuff for a PDS, plus a schematic for the ITS sensor. |
|
04-19-2017, 09:09 AM | #14 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 36v EZGO just clicks when pedal is pushed
Quote:
2. If it reads an open between the two large studs, that is normal unless the solenoid is energized. 3. There are five sets of splines. On on each end of both rear axles and between motor and differential input shaft. Also, rear axles have been know to break, but not a common occurrence in a stock cart. And as Sir Nuke mentioned, gear issues. |
|
04-19-2017, 09:26 AM | #15 |
Not Yet Wild
Join Date: Apr 2017
Posts: 58
|
Re: 36v EZGO just clicks when pedal is pushed
Thanks Johnnie, you are the man!
Sorry I said 17/64 but I mean 7/32. Reading and re-reading this stuff can make your head start to spin. 1.) I was in fact referring to J4 pins 1&2 and got 0 both on both (even with pedal pressed in) I will follow the flowchart for 0V. 2.)Good to know that it is supposed to read open. Solenoid looks great and is in fact clicking. 3.) Thanks for that. I at least ruled out 2 of the 5 splines. I will check the differential fluid out and see what we have. The axles do not seem to be broken. I would rather have the motor be shot than internal diff issues........... Talking to the owner, I have found out that the cart just recently started this grinding, and it started to happen as the cart slowly got slower and slower, to where now it won't even try to move. |
04-19-2017, 10:54 AM | #16 |
Gone Wild
Join Date: Aug 2014
Location: fletcher,nc
Posts: 601
|
Re: 36v EZGO just clicks when pedal is pushed
what is the pack`s voltage at rest and under load?
|
04-19-2017, 02:56 PM | #17 |
Not Yet Wild
Join Date: Apr 2017
Posts: 58
|
Re: 36v EZGO just clicks when pedal is pushed
|
04-19-2017, 09:12 PM | #18 |
Not Yet Wild
Join Date: Apr 2017
Posts: 58
|
Re: 36v EZGO just clicks when pedal is pushed
Good news on the rear end. Differential and axle spindles all look great. No heavy chunks or shavings in the diff oil. A little bit of glitter, but I suppose that is normal wear and tear.
Now to get on this flow chart of electrical............... |
04-20-2017, 06:10 AM | #19 |
Master of All Things
Join Date: May 2013
Location: West Columbia, Texas
Posts: 18,001
|
Re: 36v EZGO just clicks when pedal is pushed
well seeing as how your hubs are in good shape, and now the diff appears to be good.....you may be replacing or having your motor rebuilt....that's all that's left that could be GRINDING.
|
04-20-2017, 07:16 AM | #20 | |
Not Yet Wild
Join Date: Apr 2017
Posts: 58
|
Re: 36v EZGO just clicks when pedal is pushed
Quote:
Still gotta figure out that high pedal code. |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
1998 EZGO 'clicks' when pedal depressed | Electric EZGO | |||
No click when pedal is pushed | Electric EZGO | |||
1982 ezgo only clicks when hit accel pedal? | Electric EZGO | |||
Taylor Dunn B2-48 Shakes Violently after solenoid clicks and pedal pushed | Electric golf carts |