09-21-2015, 05:41 PM | #1 |
Not Yet Wild
Join Date: Jun 2015
Posts: 29
|
Pulsar coil
Wondering what pulsar coil everyone using on the hei conversion
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-21-2015, 07:47 PM | #2 |
Test before replacing
Join Date: Aug 2013
Location: Ohio side of the Pennsylvania border.
Posts: 3,496
|
Re: Pulsar coil
The original pulsar is used. The ignitor is what gets replaced.
|
09-21-2015, 08:12 PM | #3 |
Not Yet Wild
Join Date: Jun 2015
Posts: 29
|
Re: Pulsar coil
OK this what I've got I bought someone's cobbled up mess trying to get it fixed right for the wife and kid to drive i did the he I conversion and someone already replaced pulsar I ohm it read 154 and just put new igniter and he coil as conversions states but can't get it to spark also see pics where the ignitor has a wire coming off of the mounting hole where does it go
|
09-21-2015, 08:16 PM | #4 |
Not Yet Wild
Join Date: Jun 2015
Posts: 29
|
Re: Pulsar coil
|
09-21-2015, 09:11 PM | #5 |
Gone Wild
Join Date: Apr 2011
Location: Washington State
Posts: 385
|
Re: Pulsar coil
that wire goes to a good ground, it grounds the hei metal plate,which should be mounted on metal, preferbly aluminum for a heatsink.
|
09-21-2015, 09:18 PM | #6 |
Not Yet Wild
Join Date: Jun 2015
Posts: 29
|
Re: Pulsar coil
OK I've just got mine mounted to the frame is that OK ?
|
09-21-2015, 10:07 PM | #7 |
Gone Wild
Join Date: Apr 2011
Location: Washington State
Posts: 385
|
Re: Pulsar coil
well you can leave it , but when you get it running, check the hei and see if its getting hot, if hot to touch ,remount to a aluminum bar for better cooling.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
G9 Pulsar Coil HELP ME PLEASE!!! | Gas Yamaha | |||
G9 pulsar coil | Gas Yamaha | |||
Pulsar coil | Gas EZGO | |||
Pulsar coil | Gas EZGO | |||
pulsar coil | Gas Yamaha |