|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
01-04-2017, 07:03 AM | #1 |
Not Yet Wild
Join Date: Dec 2016
Posts: 5
|
Yamaha G2 ignitor, ignition coil wirings, starter relay mixed up
Hi everyone. Can anyone help me with my wiring harness for my G2. I have seen the service manual and a very good wiring diagram posted here but i have some questions.
1. My ignitor has plug with only 4 pins. Can someone help where to wire or connect each pin? 2. What should be attached or wired to my ignition coil? 3. To what pin and plug (starter relay) should my red and black be connected to? Either? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-06-2017, 02:07 PM | #2 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Yamaha G2 ignitor, ignition coil wirings, starter relay mixed up
I'm betting you know this, but, That ignitor is not a yamaha part. So, need to figure out what that ignitor belongs to so we can sort this out.
|
01-10-2017, 08:10 AM | #3 | |
Not Yet Wild
Join Date: Dec 2016
Posts: 5
|
Re: Yamaha G2 ignitor, ignition coil wirings, starter relay mixed up
Quote:
But regarding the wires of the primary of the soleniod, can ot be interchanged? The black on this plug and this red wire on this side or the other way around? |
|
01-13-2017, 09:54 AM | #4 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Yamaha G2 ignitor, ignition coil wirings, starter relay mixed up
The polarity on a old gas Yamaha solenoid are not polarity sensitive. (no diode uses, so it doesn't care polarity)
|
01-15-2017, 08:07 PM | #5 |
Not Yet Wild
Join Date: Dec 2016
Posts: 5
|
Re: Yamaha G2 ignitor, ignition coil wirings, starter relay mixed up
|
01-18-2017, 06:20 PM | #6 |
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,433
|
Re: Yamaha G2 ignitor, ignition coil wirings, starter relay mixed up
In my G9 the white/red wire goes battery to key to pedal to start solenoid/coil/ignitor and I forget it might go to the VR also. That lights up the whole cart, the ignition parts also have ground wires.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Ignition coil and starter/generator | Gas EZGO | |||
yamaha G1 starter relay assembly | Gas Yamaha | |||
1994 Yamaha G9A-Ignition Coil Reading | Gas Yamaha | |||
Yamaha G9-Ignition Coil & Ignition Switch-Help | Gas Yamaha | |||
How to get to the Ignition Coil & Ignitor | Gas Club Car |