|
09-09-2020, 11:33 AM
|
#1 |
|
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,667
|
Pair of EZGO ST Spindles etc.
ST Spindles.. 100 bucks
Pair of TXT rear fender scuff guards (never used).. 20 bucks, TXT economy lift parts.. 10 bucks 6 TXT iso-mounts.. free Pick up in southern Michigan. DSC04273.jpg DSC04274.jpg DSC04277.jpg DSC04278.jpg DSC04276.jpg |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
01-01-2021, 03:08 PM
|
#2 |
|
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,667
|
Re: Pair of EZGO ST Spindles etc.
any interest?
|
|
|
|
|
01-29-2021, 08:17 PM
|
#3 |
|
Not Yet Wild
Join Date: Jan 2021
Location: Columbia, SC
Posts: 36
|
Re: Pair of EZGO ST Spindles etc.
Stovebolt, If I can't get these Tie Rod Ends out of my current spindles by tomorrow I'll take these off your hands. Also might like to have the Economy Lift brackets.
Last edited by PharmGuy85; 01-29-2021 at 08:20 PM.. Reason: added content |
|
|
|
|
01-30-2021, 03:40 AM
|
#4 |
|
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,667
|
Re: Pair of EZGO ST Spindles etc.
Check,, did you get the part "pick up in southern Michigan"?.. I'm old and lazy.
Also are your spindles still hooked to the axle? if so I loosen the nut on the tie-rod end enough to cover the threads, then smack the nut with a brass hammer while holding another hammer tight up against the bottom of the spindle arm to take up some of the shock, if you have the spindles off put them in a vice and you won't need the extra hammer. After reading one of you posts.... All Sports makes longer tie-rod threaded tubes, can probably get the ends from them too. (850) 477-5244 Also looks like your front springs don't have enough arch = shot. |
|
|
|
|
01-30-2021, 08:56 AM
|
#5 |
|
Not Yet Wild
Join Date: Jan 2021
Location: Columbia, SC
Posts: 36
|
Re: Pair of EZGO ST Spindles etc.
Ahh I assumed the part about pick up was just for anyone local. Well I’ll try your suggestion or have to wait on the next time my buddy drives down from Traverse City so he can make a pit stop along the way.
Thanks for your help! I’ll check with All Sports on the Ends. |
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| FS- Pair of EZGO Headlights marathon/ST350 Part#5625 | Golf Carts and Parts | |||
| WTB pair of spindles and hubs | Golf Carts and Parts | |||
| EZGO Spindles | Golf Carts and Parts | |||
| Pair of EZGO'S | Electric EZGO | |||
| WTB pair of 94 up ezgo hip restraints | Golf Carts and Parts | |||
Linear Mode
