WTB: 19 spline series motor

cjpenny89 · 06-13-2022, 01:58 PM

I am building a project electric vehicle that has a 19 spline rear end. I am making the project 48v so I am looking for a 48 volt 19 spline series motor.
Please send me a PM if you have something.
Thanks

CP241 · 06-13-2022, 02:08 PM

A 36v series motor will do just fine on 48v and give you more torque and speed vs a 48v motor. You’ll have a much easier time finding a 36v motor than you would a 48v.

cjpenny89 · 06-13-2022, 02:14 PM

cp241 I knew that it totally slipped my mind! thank you for the reminder!

OuterLimits727 · 06-15-2022, 12:31 AM

I have what you’re looking for. Just pulled everything out of a txt series cart I have and started upgrading everything on it from converting the 3 bolt steering to 4 bolt, Navitas AC conversion kit, lithium batteries, etc. if interested let me know.

cjpenny89 · 06-15-2022, 06:14 AM

text me a t 989-295-2411 about the motor

SAK · 07-19-2022, 04:44 PM

Quote:

Originally Posted by OuterLimits727

I have what you’re looking for. Just pulled everything out of a txt series cart I have and started upgrading everything on it from converting the 3 bolt steering to 4 bolt, Navitas AC conversion kit, lithium batteries, etc. if interested let me know.

Do you still have this motor available?

scottyb · 07-19-2022, 05:18 PM

I have tried to run a stock PDS motor on 48 volts. The motor reacts to the higher voltage violently. It sort of full on or full off. Not too much gentle operation in between.

A client wanted to do it anyway and he was back for a new motor in 6 months time.
Leave the over-volting to the series crowd. Those motors are way more tolerant of a voltage increase.
I do not recommend 36v Sepex motors being run on 48 volts. We have had some success running them on 42v. 7/6v = 42v. But 42v chargers are a bit hard to find and cost like a 48v unit.

Boblay · 07-20-2022, 05:04 PM

Quote:

Originally Posted by SAK

Do you still have this motor available?

I’ve a good 48 volt 19 spline motor available

CP241 · 07-20-2022, 05:11 PM

Quote:

Originally Posted by scottyb

I have tried to run a stock PDS motor on 48 volts. The motor reacts to the higher voltage violently. It sort of full on or full off. Not too much gentle operation in between.

A client wanted to do it anyway and he was back for a new motor in 6 months time.
Leave the over-volting to the series crowd. Those motors are way more tolerant of a voltage increase.
I do not recommend 36v Sepex motors being run on 48 volts. We have had some success running them on 42v. 7/6v = 42v. But 42v chargers are a bit hard to find and cost like a 48v unit.

Nobody mentioned a sepex motor. He’s looking for a series motor.

cjpenny89 · 07-21-2022, 06:39 AM

I have found a 36v series motor I plan on using. Thanks CP241

06-13-2022, 01:58 PM	#1
cjpenny89 Gone Wild Join Date: Apr 2014 Posts: 407	WTB: 19 spline series motor I am building a project electric vehicle that has a 19 spline rear end. I am making the project 48v so I am looking for a 48 volt 19 spline series motor. Please send me a PM if you have something. Thanks
cjpenny89 Gone Wild Join Date: Apr 2014 Posts: 407

06-13-2022, 02:08 PM	#2
CP241 Nincompoop village idiot Join Date: Apr 2018 Location: Michigan Posts: 9,669	Re: WTB: 48v 19 spline series motor A 36v series motor will do just fine on 48v and give you more torque and speed vs a 48v motor. You’ll have a much easier time finding a 36v motor than you would a 48v.

06-13-2022, 02:14 PM	#3
cjpenny89 Gone Wild Join Date: Apr 2014 Posts: 407	Re: WTB: 48v 19 spline series motor cp241 I knew that it totally slipped my mind! thank you for the reminder!
cjpenny89 Gone Wild Join Date: Apr 2014 Posts: 407

06-15-2022, 12:31 AM	#4
OuterLimits727 Not Yet Wild Join Date: Apr 2022 Posts: 2	Re: WTB: 19 spline series motor I have what you’re looking for. Just pulled everything out of a txt series cart I have and started upgrading everything on it from converting the 3 bolt steering to 4 bolt, Navitas AC conversion kit, lithium batteries, etc. if interested let me know.
OuterLimits727 Not Yet Wild Join Date: Apr 2022 Posts: 2

06-15-2022, 06:14 AM	#5
cjpenny89 Gone Wild Join Date: Apr 2014 Posts: 407	Re: WTB: 19 spline series motor text me a t 989-295-2411 about the motor
cjpenny89 Gone Wild Join Date: Apr 2014 Posts: 407

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

07-19-2022, 05:18 PM	#7
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,406	Re: WTB: 19 spline series motor I have tried to run a stock PDS motor on 48 volts. The motor reacts to the higher voltage violently. It sort of full on or full off. Not too much gentle operation in between. A client wanted to do it anyway and he was back for a new motor in 6 months time. Leave the over-volting to the series crowd. Those motors are way more tolerant of a voltage increase. I do not recommend 36v Sepex motors being run on 48 volts. We have had some success running them on 42v. 7/6v = 42v. But 42v chargers are a bit hard to find and cost like a 48v unit.

07-21-2022, 06:39 AM	#10
cjpenny89 Gone Wild Join Date: Apr 2014 Posts: 407	Re: WTB: 19 spline series motor I have found a 36v series motor I plan on using. Thanks CP241
cjpenny89 Gone Wild Join Date: Apr 2014 Posts: 407

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
anyone put a 10 spline spicer rear to 19 spline amd motor	Electric EZGO
1985 36v 10 spline motor options or 19 spline conversion	Electric EZGO
WTB Ezgo 36v 10 spline series motor	Golf Carts and Parts
WTB 10 spline 48v series motor	Golf Carts and Parts
WTS 10 Spline Series Motor	Golf Carts and Parts