|
10-19-2019, 09:07 AM
|
#1 |
|
Not Yet Wild
Join Date: Jun 2018
Location: Fitzgerald Ga 31750
Posts: 25
|
club car gas fuel gauge
wiring a gas gauge and having troubles...
the sending unit check out from about 105 ohms to 270 ohms. hs only two leads coming from sending unit ( one to ground and one to gauge??) i have 4 terminals on gauge Marked (S) i hooked to sending unit (I) i hooked to 12 volts the third i hooked hooked to ground the 4th is the light and have not tried to hook it up.. the needle moves slighly below empty when i hook up or if i change wiring configuration it will read fulll... it doesnt seam to matter where the float swith is setting its either full or empty... but the sending unit ohms out...??? this is rebuild that has a new clone engine in it and am trying to finish up... any help would be appreciated Jamp |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
10-20-2019, 08:41 AM
|
#2 |
|
Not Yet Wild
Join Date: Jun 2018
Location: Fitzgerald Ga 31750
Posts: 25
|
Re: club car gas fuel gauge
Got it!!! it was a grounding issue... I reground everything and now it works as its supposed to... thanks
jamp |
|
|
|
 |
| Tags |
| gas gauge, throtle, wiring |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Fuel Gauge | Gas Club Car | |||
| 1987 club car choke issue and fuel gauge not working | Gas Club Car | |||
| Yamaha Concierge Drive/29 ---Fuel Gauge Replacement/Fitment for GlowShift Gauge | Gas Yamaha | |||
| Fuel gauge, oil gauge, ignition for dash kit relocation/not working | Gas Club Car | |||
| 2005 club car carry all fuel gauge??? | Gas Club Car | |||
Linear Mode
