03-15-2010, 02:42 PM | #1 |
Gone Wild
Join Date: Mar 2010
Location: Mims, FL
Posts: 217
|
'02 Air Filter removal
The air filter housing is very close to the driver's side body molding. I was able to unclip the two "wire clasps" toward the passenger side but could not get the lid off of the housing for a full inspection of the filter, which looked new for what I could see from the side. I was concerned about plastic tangs against the car body giving way and failing. Are there more than 2 wire clips holding the lid closed?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-15-2010, 06:59 PM | #2 |
Bad *** Speller!
Join Date: Oct 2009
Location: Columbus, Ohio
Posts: 1,338
|
Re: '02 Air Filter removal
to wire clips and 2 plastic thingys in back. i have to go under my cart and unscrew the box. theres 3 5/16 screws there. so i can move the whole box out. and this way to ensure th lid is fully seated correctly. cause with the choke on the box, if it leaks or not seted correctly, it will run like crap! it takes like 5 moe minutes, but saves a lot of agrovation.
|
03-16-2010, 07:23 AM | #3 |
Gone Wild
Join Date: Mar 2010
Location: Mims, FL
Posts: 217
|
Re: '02 Air Filter removal
Glad I didn't force it then. Thanks!
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Air filter for G16 | Gas Yamaha | |||
g-14 air filter box | Gas Yamaha | |||
Air filter box | Gas Yamaha | |||
k@n filter | Gas Yamaha | |||
K&N Air Filter | Gas Yamaha |