|
Gas Club Car Gas DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
06-06-2010, 01:29 AM | #1 |
Not Yet Wild
Join Date: Jun 2010
Posts: 2
|
4x4 CC old cart and new owner
Some how 4x4 CC cart ended up in Texas and now I own it... Funny I was doing a search and found pics of what is now mine on the website... My question is does anyone remember what length of drive belt he used on his cart. It was replaced with one that does not fit properly and I needed to see if I could find out what size I needed...
Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-06-2010, 07:13 AM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,417
|
Re: 4x4 CC old cart and new owner
Welcome to bgw!
Take a cloth tape or a string (to mark and be measured later). Remove the belt & lay the tape where the belt set in the drive pulley on the center shaft and around the outer edge of the rear pulley. This measurement plus 2" is the correct size belt. Post the measurement you get and some pics of the cart and somebody will direct toward a proper belt. |
06-06-2010, 09:48 AM | #3 |
Not Yet Wild
Join Date: Jun 2010
Posts: 2
|
Re: 4x4 CC old cart and new owner
Thank You will do...
|
|
|
Similar Threads | ||||
Thread | Forum | |||
New owner old cart | Electric EZGO |