|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
06-30-2010, 10:28 PM | #1 |
Gone Wild
Join Date: Nov 2007
Location: Martinsburg, WV
Posts: 651
|
My Homemade Wheel Spacers
I decided to try and make me a set of 3 inch rear wheels spacers today and it turned out pretty good for my G1. I couldn't afford a set of them so I made a set.
Calvin |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-01-2010, 12:00 AM | #2 |
Not Yet Wild
Join Date: Dec 2008
Location: California
Posts: 53
|
Re: My Homemade Wheel Spacers
Excellant idea!
|
07-01-2010, 12:09 AM | #3 |
The Fabricator
Join Date: Dec 2006
Posts: 2,016
|
Re: My Homemade Wheel Spacers
Nice! How do they ride?
|
07-01-2010, 12:23 AM | #4 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: My Homemade Wheel Spacers
Calvin, I love it when people make their own parts. i do it where ever I can if I think I can get good results.
Good job, Mike! |
07-01-2010, 07:36 AM | #5 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: My Homemade Wheel Spacers
|
07-01-2010, 08:37 AM | #6 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: My Homemade Wheel Spacers
Very nice Calvin Do they seem "tru"?
|
07-01-2010, 10:14 AM | #7 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,055
|
Re: My Homemade Wheel Spacers
Nice job Calvin!! They look good buddy
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
07-01-2010, 10:45 AM | #8 |
Gone Wild
Join Date: Apr 2008
Location: Wichita, KS
Posts: 1,530
|
Re: My Homemade Wheel Spacers
Very nice. How did you line them up? V-blocks maybe? |
07-01-2010, 01:27 PM | #9 |
Gone Wild
Join Date: Nov 2007
Location: Martinsburg, WV
Posts: 651
|
Re: My Homemade Wheel Spacers
Thanks my friends for all your nice comments. Yea I guess now I am going to have to come up with some sort of fender flares don't have a clue yet on how to make them. Last night was the first time I have had the 82 G1 out of the garage in 2 years and me and a friend drove it down the road and it seemed to run nice and true. It was the first ride I took it for with the 10 inch stretch also and the gas and brake extensions I made and everything seemed to do great. ExgoneWild I just eye balled them when I welded them together I used 1/4 inch steel and a 1/4 inch thick pipe. Layed them inside of the mag wheels and held them tight and on the other side took a pencil and went through the lug holes and marked them then put them on my drill press and drilled out the holes. Thanks again everyone for your comments have a good day and hope you all enjoy the 4th.
Calvin |
07-01-2010, 10:52 PM | #10 |
Gone Wild
Join Date: Jun 2009
Location: Canada
Posts: 358
|
Re: My Homemade Wheel Spacers
Good job Calvin
welds look nice too! |
|
|
Similar Threads | ||||
Thread | Forum | |||
Wheel spacers | Gas Club Car | |||
Wheel spacers | Golf Carts and Parts | |||
Wheel Spacers- WTT! | Golf Carts and Parts | |||
WTB wheel spacers | Golf Carts and Parts | |||
What are wheel spacers used for? | Electric EZGO |