|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
10-15-2012, 09:07 PM | #1 |
Gone Wild
Join Date: Nov 2007
Location: Martinsburg, WV
Posts: 651
|
My hook ups for mowing
Here are the steel hook ups I made to push my Swisher 60 inch finish mower with my G1. Let me know what you think thank you Calvin.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-15-2012, 09:33 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: My hook ups for mowing
Looks Good Calvin.
I tried pushing a mower here but too many hills and the back end just spun ...I hope you have better luck |
10-16-2012, 05:34 AM | #3 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,052
|
Re: My hook ups for mowing
Nice job Calvin, looks good and strong.
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
10-16-2012, 07:36 AM | #4 |
Admin
Join Date: Dec 2006
Location: TN
Posts: 101,868
|
Re: My hook ups for mowing
Great work Calvin. I use my old G9 to pull a Swisher bush hog. Check it out. There is some pic's and a video in this thread: http://www.buggiesgonewild.com/sprid...h-hogging.html
|
|
|
10-16-2012, 08:43 AM | #5 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: My hook ups for mowing
Pushing the mower eliminates the tall stripes left by the tow vehicle's wheels pushing down the grass before the mower passes by.
Great idea Calvin. |
10-16-2012, 06:34 PM | #6 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: My hook ups for mowing
Nice set up Calvin
|
10-19-2012, 11:35 AM | #7 |
Gone Wild
Join Date: Nov 2007
Location: Martinsburg, WV
Posts: 651
|
Re: My hook ups for mowing
Thanks fellows really appreciate your nice comments. Well the tires came today that Essness gave me and going to mount them today. I have to go somewhere to get a couple pieces of either 3/8 or 1/4 inch pieces of steel. I have to build a crazy wheel for the back of the Swisher so the weight of it don't have to ride on the front end of my golf cart. I had to take the back wheels off the Swisher because there was no way to turn the golf cart the tires were in the way. So I have to build a crazy wheel that will withstand the weight of the mower and take the weight off the cart.
Calvin |
|
|
Similar Threads | ||||
Thread | Forum | |||
Pot box hook up | Electric Club Car | |||
Throttle hook up | Clone Engine Swaps | |||
93 EZ Go pot box hook up | Electric EZGO |