G2 brake pedal question?

rwt101 · 04-09-2013, 07:39 PM

On my G2 if I press on the regular brake pedal (not the top section) a little too hard it will lock. It seems like it should only lock if I press on the top part. Are there any adjustments for that?
Thanks
Bob T
E. TN

sho305 · 04-09-2013, 08:17 PM

Yes, there is a rod from the top part that goes down to the lock. You have to adjust that rod. The lock pawl is too close to the catch, it should not catch unless you use the top part of pedal. You can also adjust the brakes under the floor (pull the panel out the top) to set how hard the park brake locks (or how hard you have to push I guess). For example mine locks fairly hard on I think the second click, I like it that way.

rwt101 · 04-09-2013, 08:30 PM

Thanks. A good project for tomorrow.
Bob T
E. TN

rwt101 · 04-11-2013, 08:19 PM

Found that the tab that is welded on the rod was turned to the wrong location. It was not under the locking arm. Everything is working now.
Thanks
Bob T

04-09-2013, 07:39 PM	#1
rwt101 Gone Wild Join Date: Jul 2012 Location: Pigeon Forge TN Posts: 209	G2 brake pedal question? On my G2 if I press on the regular brake pedal (not the top section) a little too hard it will lock. It seems like it should only lock if I press on the top part. Are there any adjustments for that? Thanks Bob T E. TN

04-09-2013, 08:17 PM	#2
sho305 Vegas modded 420 Join Date: Jun 2009 Location: West MI Posts: 15,443	Re: G2 brake pedal question? Yes, there is a rod from the top part that goes down to the lock. You have to adjust that rod. The lock pawl is too close to the catch, it should not catch unless you use the top part of pedal. You can also adjust the brakes under the floor (pull the panel out the top) to set how hard the park brake locks (or how hard you have to push I guess). For example mine locks fairly hard on I think the second click, I like it that way.

04-09-2013, 08:30 PM	#3
rwt101 Gone Wild Join Date: Jul 2012 Location: Pigeon Forge TN Posts: 209	Re: G2 brake pedal question? Thanks. A good project for tomorrow. Bob T E. TN

04-11-2013, 08:19 PM	#4
rwt101 Gone Wild Join Date: Jul 2012 Location: Pigeon Forge TN Posts: 209	Re: G2 brake pedal question? Found that the tab that is welded on the rod was turned to the wrong location. It was not under the locking arm. Everything is working now. Thanks Bob T

Similar Threads
Thread	Forum
94 Marathon Brake Pedal Question	Electric EZGO
Brake pedal ?	Electric EZGO
brake pedal question	Electric golf carts
Sticking Brake Pedal	Electric Club Car
G1 Brake Pedal	Gas Yamaha

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum