|
Gas Club Car Gas DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
05-14-2014, 05:45 PM | #1 |
Not Yet Wild
Join Date: Dec 2013
Location: Cumming, GA
Posts: 25
|
Please explain how I fixed my cart...
ok....so it was jerking back and forth as I posted earlier. I noticed the cable at the carb is very loose and seems like it wasn't allowing the butterfly to close.
All I did was take off the hose from the air filter (at the carb) and sprayed carb cleaner inside at the butterfly. I took it for a test ride down our huge hill...and now it isn't doing the "jerking" anymore. Did the little bit of spray clean around the butterfly and allow it to seat properly? Should the cable inside the electrical box........on the black plastic.....be loose? Any help would be great! I still need to speed it up because it seems underpowered. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-14-2014, 08:10 PM | #2 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 12,955
|
Re: Please explain how I fixed my cart...
Butterfly may have been sticking. Cleaner loosened it up
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Didn't get the scooter fixed so we took the cart | Electric EZGO | |||
To buy a cart already fixed up or to fix up an older model | Electric EZGO | |||
tryn to get my cart fixed | Sled Engine Swaps | |||
G2 pickup coil wire still burnt, but cart fixed | Gas Yamaha | |||
bought a dead 2000 club car 48v replaced obc fixed charger but cart doesn't move | Electric Club Car |